LC104S1-A1

Note : 1. Temperature and relative humidity range are shown in the figure below.  Wet bulb temperature should be 39 °C Max, and no condensation of water.

The LC104S1-A1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.

It is a transflective type⁽¹⁾ display operating in the normally white mode. This TFT-LCD has 10.4 inches diagonally measured active display area with SVGA resolution(600 vertical by 800 horizontal pixel array) Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors.

The LC104S1-A1 has been designed to apply the interface method that enables low power. Flat Link must be used as a LVDS(Low Voltage Differential Signaling) chip.

The LC104S1-A1 is intended to support applications where thin thickness, low power are critical factors and graphic display are important. In combination with the vertical arrangement of the sub-pixels, the LC104S1-A1 characteristics provide an excellent flat display for office automation products such as Tough PC.

(ref. No. 1 : Transflective type means that has a function of transmissive and reflective mode in display and display is visible indoor or outdoor under dark and sunlight at all.)