Features: ` CONSTANT ON TIME TOPOLOGY ALLOWS OPERATION WITH LOWER DUTY THAN PWM TOPOLOGY` VERY FAST LOAD TRANSIENTS` 5V Vcc SUPPLY` 1.5V TO 28V INPUT VOLTAGE RANGE` 0.9V ±1% VREF` MINIMUM OUTPUT VOLTAGE AS LOW AS 0.9V` SELECTABLE SINKING MODE` LOSSLESS CURRENT LIMIT` REMOTE SENSING` OVP,UVP LATCHE...
L6995: Features: ` CONSTANT ON TIME TOPOLOGY ALLOWS OPERATION WITH LOWER DUTY THAN PWM TOPOLOGY` VERY FAST LOAD TRANSIENTS` 5V Vcc SUPPLY` 1.5V TO 28V INPUT VOLTAGE RANGE` 0.9V ±1% VREF` MINIMUM OUTPUT VOL...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit |
VCC | VCC to GND | -0.3 to 6 | V |
VDR | VDR to GND | -0.3 to 6 | V |
HGATE and BOOT, to PHASE | -0.3 to 6 | V | |
HGATE and BOOT, to PGND | -0.3 to 36 | V | |
VPHASE | PHASE | -0.3-to 30 | V |
LGATE to PGND | 0.3 to VDR+0.3 | V | |
ILIM, VFB, VSENSE, NOSKIP, SHDN, PGOOD, OVP, VREF, INT, GNDSENSE to GND |
-0.3 to VCC+0.3 | V | |
Ptot | Power dissipation at Tamb = 25°C | 1 | W |
Tstg | Storage temperature range | -40 to 150 | °C |
L6995 is a step-down controller specifically designed to provide extremely high efficiency conversion, with losses current sensing tecnique.
The "constant on-time" topology assures fast load transient response. The embedded "voltage feed-forward" provides nearly constant switching frequency operation.
An integrator of the L6995 can be introduced in the control loop to reduce the static output voltage error.
The available remote sensing improve the static and dynamic regulation recovering the wires voltage drop. Pulse skipping technique reduces power consumption at light load. Drivers current capability allows output current in excess of 20A.