Motor / Motion / Ignition Controllers & Drivers Dual Full Bridge
L6204: Motor / Motion / Ignition Controllers & Drivers Dual Full Bridge
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $3.65 - 5.39 / Piece
Motor / Motion / Ignition Controllers & Drivers DMOS Full Bridge
Type : | Driver | Operating Supply Voltage : | 12 V to 48 V | ||
Supply Current : | 0.01 A | Mounting Style : | Through Hole | ||
Package / Case : | PDIP-20 | Packaging : | Tube |
Symbol |
Parameter |
Test Conditions |
Unit |
VS |
Supply Voltage |
50 |
V |
VIN,VEN |
Input or Enable Voltage Range |
-0.3 to +7 |
V |
Io |
Pulsed Output Current |
3 |
A |
VSENSE |
Sensing Voltage |
-1 to 4 |
V |
VBOOT |
Bootstrap Supply |
60 |
V |
Ptot |
Total power dissipation: (Tpins = 80°C) Total power dissipation: (Tamb = 70°C no copper area on PCB) Total power dissipation: (Tamb = 70°C 8cm2 copper area on PCB) |
5 1.23 2 |
W W W |
Tstg, Tj |
Storage and Junction Temperature |
-40 to 150 |
°C |
The L6204 is a dual full bridge driver for motor ontrol applications realized in BCD technology hich combines isolated DMOS power transistors ith CMOS and Bipolar circuits on the same chip. y using mixed technology it has been possible to ptimize the logic circuitry and the power stage to chieve the best possible performance.
The logic inputs are TTL/CMOS compatible. Both channels are controlled by a separate Enable.
Each bridge has a sense resistor to control the currenrt level.
The L6204 is mounted in an 20-lead Powerdip and SO 24+2+2 packages and the four center pins are used to conduct heat to the PCB. At normal operating temperatures no external heatsink is required.