KS88P2432

Features:

Memory
• ROM: 32-Kbyte (KS88C2432/P2432)
• ROM: 16-Kbyte (KS88C2416/P2416)
• RAM: 1056-Byte (KS88C2432/P2432, KS88C2424/P2424)
• RAM: 544-Byte (KS88C2416/P2416, KS88C2408/P2408)
• Data memory mapped I/O
Oscillation Sources
• Crystal, ceramic, RC (main)
• Crystal for subsystem clock
• Main system clock frequency 1-10 MHz
(3 MHz at 1.8 V, 10 MHz at 2.7 V)
• Subsystem clock frequency: 32.768 kHz
• CPU clock divider (1/1, 1/2, 1/8, 1/16)
Two Power-Down Modes
• Idle (only CPU clock stops)
• Stop (System clock stops)
Interrupts
• 6 level 8 vector 8 internal interrupt
• 2 level 8 vector 8 external interrupt
45 I/O Pins
• 45 configurable I/O pins
Basic Timer
• Overflow signal makes a system reset.
• Watchdog function
8-Bit Timer/Counter A
• Programmable 8-bit timer
• Interval, capture, PWM mode
• Match/capture, overflow interrupt
8-Bit Timer/Counter B
• Programmable 8-bit timer
• Carrier frequency generator
16-Bit Timer/Counter 0
• Programmable 16-bit timer
• Match interrupt generates
16-Bit Timer/Counter 1
• Programmable 16-bit timer
• Interval, capture, PWM mode
• Match/capture, overflow interrupt
Watch Timer
• Real-time and interval time measurement
• Clock generation for LCD
• Four frequency outputs for buzzer sound
LCD Controller/Driver
• Maximum 16-digit LCD direct drive capability
• Display modes: static, 1/2 duty (1/2 bias)
• 1/3 duty (1/2 or 1/3 bias), 1/4 duty (1/3 bias)
A/D Converter
• Eight analog input channels
• 50 ms conversion speed at 1 MHz fADC clock
• 10-bit conversion resolution
8-Bit Serial I/O Interface
• 8-bit transmit/receive mode
• 8-bit receive mode
• LSB-first/MSB-first transmission selectable
• Internal/external clock source
Voltage Booster
• LCD display voltage supply
• S/W control en/disable
• 3.0 V drive
Voltage Detector
• Programmable detection voltage
(2.2 V, 2.4 V, 3.0 V, 4.0 V)
• En/Disable S/W selectable
Instruction Execution Times
• 400 ns at 10 MHz (main)
• 122 us at 32.768 kHz (subsystem)
Operating Temperature Range
• -40 °C to 85 °C
Operating Voltage Range
• 1.8 V to 5.5 V
Package Type
• 80-pin QFP
• 80-pin TQFP
KS88C2432's ROM version device
• KS88C2424 (ROM 24 Kbyte)
KS88C2416's ROM version device
• KS88C2408 (ROM 8 Kbyte)


Pinout




Specifications

Parameter	Symbol	Conditions	Rating	Unit
Supply voltage	VDD	-	0.3 to + 6.5	V
Input voltage	VIN	-	0.3 to VDD + 0.3	V
Output voltage	VO		0.3 to VDD + 0.3	V
Output current High	IOH	One I/O pin active	18	mA
		All I/O pins active	60
Output current Low	IOL	One I/O pin active	+30
		Total pin current for port	+ 100
Operating temperature	TA	-	40 to + 85
Storage temperature	TSTG	-	65 to + 150

Description

The KS88P2416/P2432 are OTP (One Time Programmable) version of the KS88P2432microcontroller.
The KS88P2416 microcontroller has an on-chip 16-Kbyte one-time-programmable EPROM instead of a masked
ROM. The KS88P2432 microcontroller has an on-chip 32-Kbyte one-time-programmable EPROM instead of a
masked ROM. The KS88P2416 is comparable to the KS88C2416, both in function and in pin configuration.
The KS88P2432 is comparable to the KS88C2432, both in function and in pin configuration.