KK74ACT374

Features:

• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25
• Outputs Source/Sink 24 mA


Pinout




Specifications

Symbol	Parameter	Value	Unit
VCC	DC Supply Voltage (Referenced to GND)	-0.5 to +7.0	V
VIN	DC Input Voltage (Referenced to GND)	-0.5 to VCC +0.5	V
VOUT	DC Output Voltage (Referenced to GND)	-0.5 to VCC +0.5	V
IIN	DC Input Current, per Pin	±20	mA
IOUT	DC Output Sink/Source Current, per Pin	±50	mA
ICC	DC Supply Current, VCC and GND Pins	±50	mA
PD	Power Dissipation in Still Air, Plastic DIP+                                        SOIC Package+	750 500	mW
TSTG	Storage Temperature	-65 to +150
TL	Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package)	260

*Maximum Ratings are those values beyond which damage to the device may occur.
  Functional operation should be restricted to the Recommended Operating Conditions.
  +Derating - Plastic DIP: - 10 mW/ from 65° to 125
  SOIC Package: : - 7 mW/ from 65° to 125



Description

The KK74ACT374 is identical in pinout to the LS/ALS374,HC/HCT374. The KK74ACT374  may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs.

Data meeting the setup and hold time is clocked to the outputs with the rising edge of the Clock. The Output Enable input does not affect the states of the flip-flops, but when Output Enable is high, the outputs are forced to the high-impedance state; thus, data may be stored even when the outputs are not enabled.