Features: • TTL/NMOS Compatible Input Levels• Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 µA; 0.1 µA @ 25°C• Outputs Source/Sink 24 mAPinoutSpecifications Symbol Parameter VALUE U...
KK74ACT151: Features: • TTL/NMOS Compatible Input Levels• Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 µA; 0.1 &...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | VALUE | UNIT |
VCC | DC Supply Voltage (Referenced to GND) | -0.5 to +7.0 | V |
VIN | DC Input Voltage (Referenced to GND) | -0.5 to VCC +0.5 | V |
VOUT | DC Output Voltage (Referenced to GND) | -0.5 to VCC +0.5 | V |
IIN | DC Input Current, per Pin | ±20 | mA |
IOUT | DC Output Sink/Source Current, per Pin | ±50 | mA |
ICC | DC Supply Current, VCC and GND Pins | ±50 | mA |
PD | Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ |
750 500 |
mW |
Tstg | Storage Temperature | -65 to +150 | |
TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
The KK74ACT151 is identical in pinout to the LS/ALS151, HC/HCT151. The KK74ACT151 may be used as a level converter for interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The device selects one of the eight binary Data Inputs, as determined by the Address Inputs. The Strobe pin must be at a low level for the selected data to appear at the outputs. If Strobe is high, the Y output is forced to a low level and the Y output is forced to a high level.