Features: `Operating Voltage Range: 3.0 to 18 V`Maximum input current of 1 A at 18 V over full package-temperaturerange; 100 nA at 18 V and 25`Noise margin (over full package temperature range):1.0 V min@ 5.0 V supply2.0 V min @10.0 V supply 2.5 V min @ 15.0 V supplyPinoutSpecifications Symb...
KK4051B: Features: `Operating Voltage Range: 3.0 to 18 V`Maximum input current of 1 A at 18 V over full package-temperaturerange; 100 nA at 18 V and 25`Noise margin (over full package temperature range):1.0 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter | Value | Unit |
VCC | DC Supply Voltage (Referenced to GND) | -0.5 to +20 | V |
VIN | DC Input Voltage (Referenced to GND) | -0.5 to V CC+0.5 |
V |
IIN | DC Input Current, per Pin | ±10 | mA |
PD | Power Dissipation in Still Air | 500*1 | mW |
Ptot | Power Dissipation per Output Transistor | 100 | mW |
Tstg | Storage Temperature | -65 to +150 | |
TL | Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SO Package) |
260 |
The KK4051B analog multiplexer/demultiplexer is digitally controlled analog switches having low ON impedance and very low OFF leakage current. Control of analog signals up to 20V peak-to-peak can be achieved by digital signal amplitudes of 4.5 to 20V (if VCC- GND = 3V, a VCC- V EE of up to 13 V can be controlled; for V CC-V EE level differences above 13V a VCC - GND of at least 4.5V is required).
These multiplexer circuits dissipate extremely low quiescent power over the full V EE-GND and V CC - V CC supply-voltage ranges,independent of the logic state of the control signals. When a logic "1"is
present at the ENABLE input terminal all channels are off.
The KK4051B is a single 8-channel multiplexer having three binary control inputs, A, B and C, and an ENABLE input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output.