KFU8-UFC-Ex1

The KFU8-UFC-Ex1 is designed as frequency current converters with limit value.

The KFU8-UFC-Ex1 has many features. The first one is 1-channel. The second one is input frequency would be from 0.001 Hz to 5 kHz. The third one is about its analogue output 0/4 mA to 20 mA. The fourth one is measuring range parameterizable. The fifth one is 2 relay outputs. The sixth one is 1 electronic output, isolated. The seventh one is each output can be assigned individual parameters, such as a limiting value (high/low alarm), incrementing, pulse separator or error message output. The eighth one is start-up override. The ninth one is restart inhibit. The tenth one is lead breakage (LB) and short-circuit (SC) monitoring. The eleventh one is bounce filter. The last one is parameterization via PC or control panel (optional). That are all the main featurepower supply specifications have been concluded into several points as follow. The first one is about its connection type which would be terminals 23, 24. The second one is about its rated operational voltage which would be from 20 to 90 VDC and from 48 to 253 VAC. The third one is safety maximum voltage would be 253 VAC. The fourth one is about its power loss / power consumption which would be less than 2 W and 2.5 VA / 2.2 W; 3 VA.

Also some specifications about its input (not intrinsically safe). The first one is about its connection type which would be terminals 13+, 14-. The second one is about its function which means start-up override; 1 to 1000 s, adjustable in steps of 1s. The third one is about its quiescent voltage / short-circuit current which would be 18 V / 5 mA. The fourth one is about its active / passive which would be larger than 4 mA (for min. 100 ms) or less than 1.5 mA. And so on. For more information please contact us.