DescriptionThe KA78RH33RTF (ROHS) is designed as a 3.3V fixed low dropout voltage regulator specifically designed for use in low voltage operation. The maximum load current is 0.8A and the dropout voltage is guaranteed to be 1V typ. The dropout voltage varies with load current. The regulator consi...
KA78RH33RTF (ROHS): DescriptionThe KA78RH33RTF (ROHS) is designed as a 3.3V fixed low dropout voltage regulator specifically designed for use in low voltage operation. The maximum load current is 0.8A and the dropout v...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The KA78RH33RTF (ROHS) is designed as a 3.3V fixed low dropout voltage regulator specifically designed for use in low voltage operation. The maximum load current is 0.8A and the dropout voltage is guaranteed to be 1V typ. The dropout voltage varies with load current. The regulator consists of composite PNP-NPN pass transistors.
KA78RH33RTF (ROHS) has eight features. (1)Fixed output voltage of 3.3V. (2)Space saving SMD types of DPAK. (3)1V typ dropout at Io=800mA. (4)Output current of 800mA. (5)Thermal shutdown protection. (6)Over current protection. (7)Output trimmed to +/-1% tolerance. (8)No minimum load requirement. Those are all the main features.
Some absolute maximum ratings of KA78RH33RTF (ROHS) have been concluded into several points as follow. (1)Its power supply input voltage would be 15V. (2)Its output load current would be 800mA. (3)Its junction temperature would be 150°C. (4)Its operating junction temperature range would be from -25°C to 125°C. (5)Its storage temperature range would be from -55°C to 250°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.
Also some electrical characteristics of KA78RH33RTF (ROHS) are concluded as follow. (1)Its output voltage would be min 3.27V and typ 3.3V and max 3.33V. (2)Its line regulation would be typ 1mV and max 10mV. (3)Its load regulation would be typ 1mV and max 20mV. (4)Its ripple rejection would be min 55dB. (5)Its dropout voltage would be typ 1V and max 1.2V at Io=100mA and would be typ 1.05V and max 1.25V at Io=500mA and would be typ 1.1V and max 1.4V at Io=800mA. (6)Its quiescent current would be typ 5mA and max 10mA. (7)Its temperature coefficient of output voltage would be typ 0.2mV/°C. (8)Its peak output current would be min 800mA. (9)Its output noise voltage would be typ 100uVrms. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!