| Supply voltage |
100 to 240 VAC (50/60 Hz); 12 to 24 VDC |
| Operating voltage range |
85% to 110% of supply voltage |
| Power consumption (see note) |
15 VA max. (max. AC load with all indicators lit)
10 W max. (max. DC load with all indicators lit) |
| Sensor power supply |
80 mA at 12 VDC±10% |
| Insulation resistance |
20 M min. (at 500 VDC) between external terminal and case.
Insulation provided between inputs, outputs, and power supply. |
| Dielectric strength |
2,000 VAC for 1 min between external terminal and case.
Insulation provided between inputs, outputs, and power supply |
| Noise immunity |
±1,500 V on power supply terminals in normal or common mode ±1 s, 100 ns for square-wave noise
with 1 ns |
| Vibration resistance |
Malfunction: 10 to 55 Hz, 0.5-mm for 10 min each in X, Y, and Z directions
Destruction: 10 to 55 Hz, 0.75-mm for 2 hrs each in X, Y, and Z directions |
| Shock resistance |
Malfunction: 98 m/s2 for 3 times each in X, Y, and Z directions
Destruction: 294 m/s2 for 3 times each in X, Y, and Z directions |
| Ambient temperature |
Operating: −10°C to 55°C (with no icing)
Storage: −20°C to 65°C (with no icing) |
| Ambient humidity |
Operating: 25% to 85% (with no condensation) |
| EMC |
(EMI) EN61326+A1 Industry
Emission Enclosure: CISPR 11 Group 1 class A: CISRP16-1/-2
Emission AC Mains: CISPR 11 Group 1 class A: CISRP16-1/-2
(EMS) EN61326+A1 Industry
Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)
8 kV air discharge (level 3)
Immunity RF-interference: EN61000-4-3: 10 V/m (amplitude-modulated,
80 MHz to 1 GHz) (level 3)
Immunity Fast Transient Noise: EN61000-4-4: 2 kV (power line) (level 3)
Immunity Burst Noise: 1 kV line to line (I/O signal line)
Immunity Surge: EN61000-4-5: 1 kV line to line
2 kV line to ground (power line)
Immunity Conducted Disturbance EN61000-4-6: 3 V (0.15 to 80 MHz) (level 2)
Immunity Voltage Dip/Interrupting EN61000-4-11: 0.5 cycles, 0, 180°, 100% (rated voltage) |
| Approved standards |
UL508, CSA22.2;
Conforms to EN61326+A1, EN61010-1 (IEC61010-1)
Conforms to VDE0106/P100 (finger protection) when the terminal cover is mounted. |
| Weight |
Approx. 400 g |
K3NR Data Sheet
