Features: SpecificationsDescriptionThe JE10 has the following features including Maximum switching capability up to 50A;Lamp load up to 5000W;Capacitor load up to 200uF (Min. inrush current at 500A/10s);Creepage distance: 8mm;Dielectric strength: more than 4000VA(between coil and contacts);Wash ti...
JE10: Features: SpecificationsDescriptionThe JE10 has the following features including Maximum switching capability up to 50A;Lamp load up to 5000W;Capacitor load up to 200uF (Min. inrush current at 500A/...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The JE10 has the following features including Maximum switching capability up to 50A;Lamp load up to 5000W;Capacitor load up to 200uF (Min. inrush current at 500A/10s);Creepage distance: 8mm;Dielectric strength: more than 4000VA(between coil and contacts);Wash tight and flux proofed types available;Manual switch function available;Environmental friendly product (RoHS compliant);Outline Dimensions: (39.0 x 15.0 x 30.2)mm.
Under the ambience with dangerous gas like HzS, SOz or NOz, wash tight type is recommended; please test the relay in real applications.If the ambience allows, flux proofed is preferentially recommended.JE10 is an environmental friendly product. Please mark a special code.Cadmium contact; (555) stands for RoHS compliant with Cadmium-free.As to wash tight type, before using relay, please remove the vent part on(555) or (551) when ordering. (551) stands RoHS compliant with contact the top of the cover.Considering the initial state might be changed in transit (terminal 3# and 4# is opening by default), upon requied, position should be set or reset.As to lamp load, capacitive load, motor load or some occasion asking for according with RoHS, please choose AgSnO2 contact material.Relay is on the "set" status when being released from stock, with the consideration of shock risen from transit and relay mounting, relay would be changed to "reset" status, therefore, when application(connecting the power supply), please reset the relay to "set" or "reset" status on request.In order to maintain "set" or "reset" status, energized voltage to coil should reach the rated voltage, impulse width should be 5 times more than"set" or "reset" time. Do not energize voltage to "set" coil and "reset" coil simultaneously. And also long energized time (more than 1 min) should be avoided.In order to avoid changing operate voltage, products should not be kept in strong magnetic field during transportation, storage and application.
This datasheet of JE10 is for the customers' reference. All the specifications are subject to change without notice.We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to choose the suitable product JE10 for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user's responsibility to determine which product should be used only.