ITR8117

      The ITR8117(Slot Optical Switch) is a gallium arsenide infrared emitting diode which is coupled with a silicon photo transistor in a plastic housing. The packaging system is designed to optimizes the mechanical resolution, coupling efficiency, and insulates ambient light. The slot in the housing a provides a means of interrupting the signal with printer, scanner, copier, or other opaque material, switching the output from an " ON" to" OFF" state.
      The features of ITR8117 are Wide gap between light emitter and detector(2.1mm), High sensing accuracy, PWB mounting type package, Pb free, which can be used as Copier, Printer, Facsimile, Ticket vending machine, Opto-electronic switch(1.All dimensions are in millimeter. 2.General Tolerance:±0.2mm 3.Lead spacing is measured where the lead emerge from the package.4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don't reproduce or cause anyone to reproduce them without EVERLIGHT's consent. 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. ).
      The absolute maximum ratings (Ta=25) of ITR8117 are Operating Temperature(Topr)=-25~+85, Storage Temperature(Tstg)=-40~+85, Lead Soldering Temperature (1/16 inch from body for 5 seconds)(Tsol)=260, Collector Power Dissipation (PC)=75mW, Collector Current(IC)=20mA, Collector-Emitter Voltage (VCEO)=30V, Emitter-Collector Voltage(VECO)=5V, Power Dissipation at(or below)25 Free Air Temperature(Pd)=75mW, Reverse Voltage(VR)=5V, Forward Current(IF)=50 mA, Peak Forward Current Pulse width 100s, Duty cycle=1%(IFP)=1A.