Common Mode Rejection Ratio (Min)
:
Bandwidth
:
Operating Supply Voltage
:
Operating Temperature Range
:
Package / Case
:
Packaging
: Tube
Mounting Style
: Through Hole
Input Offset Voltage
: 100 mV
Supply Current
: 6.5 mA
Pinout
DescriptionThe ISO120G is a kind of precision isolation amplifier. A power supply range of ±4.5V to ±18V and low quiescent current make these amplifiers ideal for a wide range of applications.The typical applications include instrial process control, ground loop emlimination, motor and SCR control, power monitoring, analytical measurements, biomedical measurements, data acquisition and test equipment.
There are some features as follows. First is 100% tested for partial discharge. The second is rated 1500 Vrms. Then is high IMR which is 115 dB at 60Hz. Next is user control of carrier frequency. The fifth is low nonlinearity which is ±0.01% max. The sixth is bipolar operation: VO=±10 V. The seventh is 0.3" wide 24-PIN hermetic DIP. The eigth is synchronization capability. The last one is wide temperature range which is from -55 to +125.
The following is about the absolute maximum ratings. The supply voltage (any supply) is 18 V. The VIN, sense voltage is ±100 V. The external oscillator input is ±25 V. The signal common 1 to ground 1 is ±1 V. The signal common 2 to ground 2 is ±1 V. The continuous isolation voltage is 1500 Vrms. The VISO, dv/dt is 20kV/s. The junction temperature is from 150. The storage temperature is from -65 to +150. The lead temperature (soldering, 10s) is +300. The output short duration is continuous to common.
Parameters: | Technical/Catalog Information | ISO120G |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Isolation |
| Number of Circuits | 1 - Single |
| Package / Case | 24-CDIP (300 mil, 16 Leads) |
| Slew Rate | 2 V/s |
| Gain Bandwidth Product | - |
| Current - Supply | 4mA |
| Current - Output / Channel | 15mA |
| Voltage - Supply, Single/Dual (±) | ±4.5 V ~ 18 V |
| Output Type | - |
| -3db Bandwidth | 60kHz |
| Current - Input Bias | - |
| Operating Temperature | -25°C ~ 85°C |
| Voltage - Input Offset | 10000V |
| Drawing Number | 296; 4200050; JVA; 16 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | ISO120G
ISO120G
|
ISO120G Data Sheet
