Series: -
Function: Charge Management
Battery Chemistry: Lithium-Ion (Li-Ion), Lithium-Polymer (Li-Pol)
Operating Temperature: -40°C ~ 85°C
Mounting Type: Surface Mount
Package / Case: 10-VFDFN Exposed Pad
Packaging: Tube
Supplier Device Package: 10-DFN (3x3)
Manufacturer: Intersil
Voltage - Supply: 4.3 V ~ 24 V
DescriptionThe ISL9214IRZ belongs to ISL9214 family, which is a fully integrated low-cost single-cell Li-ion or Li-polymer battery charger. The charger accepts two power inputs, normally one from a USB (Universal Serial Bus) port and the other from a desktop cradle. The ISL9214 is an ideal charger for smart handheld devices that need to communicate with a personal computer via USB. The ISL9214 features 28V maximum voltages for both the cradle and the USB inputs. Due to the 28V rated inputs, lowcost, large output tolerance adapters can be used safely. When both inputs are powered, the cradle input is used to charge the battery. The charge current is programmable for the cradle input with a small resistor. The end-of-charge current is also programmable by another external resistor. The charger incorporates Thermaguard™ which protects the IC against over temperature. If the die temperature rises above a typical value of +125°C, a thermal foldback function reduces the charge current automatically to prevent further temperature rise. The charger has two indication pins. The PPR (power present) pin outputs an open-drain logic LOW when either the cradle or the USB input power is attached. The CHG (charge) pin is also an open-drain output that indicates a logic LOW when the charge current is above a minimum current level. When the charge current is below the preset minimum current, the CHG pin will indicate a logic HIGH signal. This status is latched and will be reset under one of these events: (1) the part is disabled and re-enabled; (2) the selected input source has been removed and reapplied, (3) the USBON turns LOW, or (4) the BAT pin voltage falls below the recharge threshold (~3.9V).
The features of ISL9214 are (1)complete charger for single-cell Li-ion/polymer batteries ; (2)dual input power sources for cradle and USB; (3)low component count; (4)integrated pass elements; (5)fixed 380mA USB charge current; (6)programmable cradle charge current; (7)charge current thermaguard™ for thermal protection; (8)28V maximum voltages for cradle and USB inputs; (9)adapter presence and charge indications; (10)less than 0.5A leakage current off the battery when no input power attached programmable end-of-charge current; (11)ambient temperature range: -40°C to +85°C; (12)no external blocking diode required.
The absolute maximum ratings of ISL9214 can be summarized as (1)supply voltage (CRDL, USB): -0.3V to 28V; (2)other input voltage (EN, USBON, ICDL, IMIN, BAT): -0.3V to 7V; (3)open-drain pull-up voltage (PPR, CHG):-0.3V to 7V; (4)ESD rating: human body model (JEDEC JESD22-A114-D): 7000V/machine model (JEDEC JESD22-A115-A): 300V. And the recommended operating conditions are (1)ambient temperature range: -40°C to +85°C; (2)supply voltage (USB Pin): 4.3V to 5.5V; (3)supply voltage (CRDL Pin): 4.3V to 24V; (4)typical cradle charge current: 100mA to 1A; (5)typical USB charge current: 380mA. The thermal information are (1)maximum junction temperature (plastic package): +150°C; (2)maximum storage temperature range : -65°C to +150°C; (3)maximum lead temperature (soldering 10s):+300°C.
Parameters: | Technical/Catalog Information | ISL9214IRZ |
| Vendor | Intersil |
| Category | Integrated Circuits (ICs) |
| Battery Type | Li-Ion, Li-Pol |
| Function | Charge Management |
| Package / Case | 10-DFN |
| Packaging | Tube |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Supply | 4.3 V ~ 24 V |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | ISL9214IRZ
ISL9214IRZ
|
ISL9214IRZ Data Sheet
