ISL90460

Features:

• Volatile Solid-State Potentiometer
• 2-pin UP/DN Interface
• DCP Terminal Voltage, 2.7V to 5.5V
• Tempco 35ppm/ Typical
• 32 Wiper Tap Points
• Low Power CMOS
- Active current 25µA max.
- Supply current 0.3µA
• Available RTOTAL Values = 10kΩ, 50kΩ, 100kΩ
• Temp Range -40 to +85
• Packages
- 5 Ld SC-70, SOT-23
• Pb-Free Plus Anneal Available (RoHS Compliant)




Pinout






Specifications

Storage Temperature . . . . . . . . . . . . . . . . . . .... . . . . .-65 to +150
Voltage on CS, U/D and V_CC with Respect to GND . . ...... . -1V to +7V
Lead Temperature (Soldering 10s) . . . . . . . . . . . . . . . . .... . . . . 300
IW (10s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±6mA
Power Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ... . . . . .1mW




Description

The Intersil ISL90460 is a digitally controlled potentiometer (XDCP). Configured as a variable resistor, the device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controlled by a 2- pin Up/Down interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS and U/D inputs. The device can be used in a wide variety of applications including: LCD contrast control Parameter and bias adjustments Industrial and automotive control Transducer adjustment of pressure, temperature, position, chemical, and optical sensors Laser Diode driver biasing Gain control and offset adjustment