Features: • Pb-Free Plus Anneal Available (RoHS Compliant)
• Pin Compatible Replacement for the MAX4684 and
MAX4685
• ON Resistance (RON)
- V+ = +2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.21
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.14
• RON Matching Between Channels, maximum . . . 0.05
• RON Flatness Across Signal Range, maximum .. . 0.03
• Single Supply Operation . . . . . . . . . . . . +1.8V to +4.5V
• Low Power Consumption PD . . . . . . . . .. . . . . <0.32W
• Fast Switching Action (V+ = +2.7V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43ns
- tOFF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27ns
• Guaranteed Break-before-Make
• 1.8V Logic Compatible
• Low I+ Current when VinH is not at the V+ Rail
• AvailablApplication•Battery powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
• Audio and Video SwitchingPinout
SpecificationsV+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +5V
Input Voltages
NO, NC, IN (Note 2) . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Output Voltages
COM (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)
Continuous Current NO, NC, or COM . . . . . . . . . . . . . . . ±300mA
Peak Current NO, NC, or COM
(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . ±500mA
ESD HBM rating (Per Mil-Std-883, Method 3015) . . . .. . . . . . ±2kV
2. Signals on NC, NO, IN, or COM exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current ratings.
DescriptionThe Intersil ISL84684II device is a low ON-resistance, low voltage, bidirectional, dual single-pole/double-throw (SPDT) analog switch designed to operate from a single +1.8V to +4.5V supply. Targeted applications include battery powered equipment that benefit from low RON (0.21) and fast switching speeds (tON = 43ns, tOFF = 27ns). The digital logic input is 1.8V logic-compatible when using a single +1.8V to 4.5V supply.
Cell phones, for example, often face ASIC functionality limitations. The number of analog input or GPIO pins may be limited and digital geometries are not well suited to analog switch performance. This part may be used to "mux-in" additional functionality while reducing ASIC design risk. The ISL84684II is offered in a 2.00mm x 1.50mm chipscale package, alleviating board space limitations. The 4x3 array of solder balls are spaced with a 0.5mm ball pitch.
The ISL84684II is a committed dual single-pole/double-throw (SPDT) that consist of two normally open (NO) and two normally closed (NC) switches. This configuration can be used as a dual 2-to-1 multiplexer. The ISL84684II is pin compatible with the MAX4684 and MAX4685.
ISL84684II Data Sheet
