IC MULTIPLE POWER CTRLR 20-SOIC
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe ISL60002 FGA voltage references are very high precision analog voltage references f...
US $2.57 - 3.95 / Piece
Voltage & Current References PREC 3.3V HI OUTPUT FGAVREF 1MV -40 - +1
Series: | - | Manufacturer: | Intersil |
Propagation Delay (Max) : | 0.75 ns | Applications: | Power Supply Controller/Monitor |
Voltage - Input: | - | Voltage - Supply: | 4.75 V ~ 5.25 V |
Current - Supply: | 6mA | Operating Temperature: | 0°C ~ 70°C |
Mounting Type: | Surface Mount | Package / Case: | 20-SOIC (0.295", 7.50mm Width) |
Supplier Device Package: | 20-SOIC W |
The ISL6505CB complements other power building blocks(voltage regulators) in ACPI-compliant designs for microprocessor and computer applications. The IC ISL6505CB integrates three linear controllers/regulators, switching, monitoring and control functions into a 20-pin wide-body SOIC or 20-pin QFN (also known as MLF) 5x5 package. The ISL6505CB's operating mode (active or sleep outputs) is selectable through two digital control pins, S3 and S5.
One linear controller ISL6505CB generates the 3.3VDUAL/3.3VSB voltage plane from the ATX supply's 5VSB output, powering the south bridge and the PCI slots through an external NPN pass transistor during sleep states (S3, S4/S5). In active state (during S0 and S1/S2), the 3.3VDUAL/3.3VSB linear regulator uses an external N-channel pass MOSFET to connect the outputs directly to the 3.3V input supplied by an ATX power supply, for minimal losses. The 3.3VDUAL/3.3VSB output is active for as long as the ATX 5VSB voltage is applied to the chip.
A controller powers up the 5VDUAL plane by switching in the ATX 5V output through an NMOS transistor in active states, or by switching in the ATX 5VSB through a PMOS (or PNP) transistor in S3 sleep state. In S4/S5 sleep states, the ISL6505CB 5VDUAL output is either shut down or stays on, based on the state of the EN5 pin.
An internal linear regulator supplies the 1.2V for the voltage identification circuitry (VID) only during active states (S0 and S1/S2), and uses the 3V3 pin as input source for its internal pass element.
A linear controller generates VOUT1 from the 3.3VDUAL/3.3VSB voltage plane, using an external NFET. The voltage is user-programmable to values between 1.2V and 1.5V, using an external resistor divider. The mode ISL6505CB is user-selectable with the LAN pin; a logic high (or open) selects the 10/100 LAN mode, where VOUT1 is always on (S0-S5); a logic low selects the Gigabit Ethernet mode, where VOUT1 is only on during active modes (S0-S2).
Technical/Catalog Information | ISL6505CB |
Vendor | Intersil |
Category | Integrated Circuits (ICs) |
Type | - |
Voltage - Supply | 4.75 V ~ 5.25 V |
Current - Supply | 6mA |
Voltage - Input | - |
Package / Case | 20-SOIC |
Packaging | Tube |
Applications | Power Supply Controller/Monitor |
Operating Temperature | 0°C ~ 70°C |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | ISL6505CB ISL6505CB |