IC CHARGER BATTERY LI-ION 10DFN
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe ISL60002 FGA voltage references are very high precision analog voltage references f...
US $2.57 - 3.95 / Piece
Voltage & Current References PREC 3.3V HI OUTPUT FGAVREF 1MV -40 - +1
Series: | - | Manufacturer: | Intersil | ||
Function: | Charge Management | Battery Chemistry: | Lithium-Ion (Li-Ion), Lithium-Polymer (Li-Pol) | ||
Voltage - Supply: | 4.3 V ~ 24 V | Operating Temperature: | -40°C ~ 85°C | ||
Mounting Type: | Surface Mount | Package / Case: | 10-VFDFN Exposed Pad | ||
Supplier Device Package: | 10-DFN-EP (3x3) | Package / Case : | SOP-20 |
The ISL6299IRZ belongs to ISL6299, which is a fully integrated low-cost single-cell Li-ion or Li-polymer battery charger. The charger ISL6299IRZ accepts two power inputs, normally one from a USB (Universal Serial Bus) port and the other from a desktop cradle. The ISL6299IRZ is an ideal charger for smart handheld devices that need to communicate with a personal computer via USB. The ISL6299IRZ features 28V and 7V maximum voltages for the cradle and the USB inputs respectively. Due to the 28V rating for the cradle input, low-cost, large output tolerance adapters can be used safely. When both inputs are powered, the cradle input is used to charge the battery. The charge current is programmable for the cradle input with a small resistor. The end-of-charge current for the cradle input is also programmable by another external resistor. The charger incorporates Thermaguard™ which protects the IC against over temperature. If the die temperature rises above a typical value of 100°C, a thermal foldback function reduces the charge current automatically to prevent further temperature rise. The charger preconditions the battery with low current when the battery voltage is below 2.6V. The charger has two indication pins. The PPR (power present) pin outputs an open-drain logic LOW when either the cradle or the USB input power is attached. The CHG (charge) pin is also an open-drain output that indicates a logic LOW when the charge current is above a minimum current level. When the charge current is below the minimum current, the CHG pin indicates a logic HIGH signal and the status is latched. The latch will be reset at one of these events: (1) the part is disabled and re-enabled; (2) the selected input source has been removed and re-applied, (3) The USBON turns LOW, or (4) The BAT pin voltage falls below the CV mode threshold. It can be used in smart handheld devices; cell phones, PDAs, MP3 players; digital still cameras; handheld test equipment.
The features of ISL6299IRZ are (1)complete charger for single-cell li-ion/polymer batteries; (2) dual input power sources for cradle and USB; (3) low component count; (4) integrated pass element; (5) fixed 380mA USB charge current; (6) programmable cradle charge current; (7) charge current thermaguard™ for thermal ; (8)protection; (9) 28V maximum voltage for the cradle input; (10) charge indication; (11) adapter presence indication; (12) less than 0.5µA leakage current off the battery when no ; (13)input power attached; (14) programmable end-of-charge current with latch for cradle ; (15)input; (16) ambient temperature range: -40°C to 85°C; (17) Pb-Free available (RoHS compliant).
The absolute maximum ratings of ISL6299IRZ are (1)supply voltage (USB): -0.3V to 7V; (2)supply voltage (CRDL): -0.3V to 28V; (3)signal input voltage (EN, USBP, ICDL, IUSB, BAT): -0.3V to 7V; (4)open-drain pull-up voltage (PPR, CHG): -0.3V to 7V; (5)ambient temperature range: 40°C to 85°C; (6)supply voltage (USB Pin): 4.3V to 5.5V; (7)supply voltage (CRDL Pin): 4.3V to 24V; (8)typical cradle charge current: 300mA to 1A; (9)typical USB charge current: 380mA; (10)maximum junction temperature (plastic package): 150°C; (11)maximum lead temperature (soldering 10s): 300°C; (12)maximum storage temperature range : -65°C to 150°C.(CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.)
Technical/Catalog Information | ISL6299IRZ |
Vendor | Intersil |
Category | Integrated Circuits (ICs) |
Battery Type | Li-Ion, Li-Pol |
Function | Charge Management |
Package / Case | 10-DFN |
Packaging | Tube |
Operating Temperature | -40°C ~ 85°C |
Voltage - Supply | 4.3 V ~ 24 V |
Drawing Number | * |
Lead Free Status | Lead Free |
RoHS Status | RoHS Compliant |
Other Names | ISL6299IRZ ISL6299IRZ |