Features: • High Speed (480Mbps) Signaling Capability per USB 2.0• Low Distortion Negative Signal Capability• Control Pin to Open all Switches and Enter Low Power State• Low Distortion Mono Audio Signal- THD+N at 20mW into 32 Load . . . . . . . . . . . . . <0.1%• L...
ISL54208: Features: • High Speed (480Mbps) Signaling Capability per USB 2.0• Low Distortion Negative Signal Capability• Control Pin to Open all Switches and Enter Low Power State• Low ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
DescriptionThe ISL51002 3-channel, 10-bit Analog Front End (AFE) contains all the functionality ne...
DescriptionThe ISL51002 3-channel, 10-bit Analog Front End (AFE) contains all the functionality ne...
The Intersil ISL54208 dual SPDT (Single Pole/Double Throw) switches combine low distortion audio/video and accurate USB 2.0 high speed (480Mbps) data signal switching in the same low voltage device. When operated with a 2.7V to 3.6V single supply these analog switches allow audio/video signal swings below-ground, allowing the use of a common USB and audio/video connector in digital cameras, camcorders and other portable battery powered Personal Media Player devices.
The ISL54208 logic control pins are 1.8V logic compatible which allows control via a standard controller. With a VDD voltage in the range of 2.7V to 3.6V the IN pin voltage can exceed the VDD rail allowing for the USB 5V VBUS voltage from a computer to directly drive the IN pin to switch between the audio/video and USB signal sources in the portable device. The part has an enable control pin to open all the switches and put the part in a low power state.
The ISL54208 is available in a small 10 Ld 2.1mmx1.6mm ultra-thin TQFN package and a 10 Ld 3mmx3mm TDFN package. It operates over a temperature range of -40 to +85°C.