ISL3293E

Features:

• High ESD Protection on RS-485 Outputs . . ±16.5kV HBM
- IEC61000-4-2 Contact Test Method . . . . . . . . . . . . ±7kV
- Class 3 ESD Level on all Other Pins . . . . . . >8kV HBM
• Specified for +125 Operation (V_CC 3.6V Only)
• Logic Supply Pin (VL) Eases Operation in Mixed Supply Systems (ISL3296E through ISL3298E Only)
• Hot Plug - Tx Outputs Remain Three-state During Power-up
• Low Tx Leakage Allows >256 Devices on the Bus
• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 20Mbps
• Low Quiescent Supply Current . . . . . . . . . . .150A (Max)
- Very Low Shutdown Supply Current. . . . . . . 1A (Max)
• -7V to +12V Common Mode Output Voltage Range (V_CC 3.6V Only)
• Current Limiting and Thermal Shutdown for Driver Overload Protection (V_CC 3.6V Only)
• Tri-statable Tx Outputs
• 5V Tolerant Logic Inputs When V_CC 5V
• Pb-Free (RoHS Compliant)




Application

• Clock Distribution
• High Node Count Systems
• Space Constrained Systems
• Security Camera Networks
• Building Environmental Control/Lighting Systems
• Industrial/Process Control Networks




Pinout






Specifications

V_CC to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . -0.3V to 7V
V_L to GND (ISL3296E thru ISL3298E Only) . . -0.3V to (V_CC +0.3V)
Input Voltages
DI, DE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 7V
Output Voltages
Y, Z (V_CC 3.6V) . . . . . . . . . . . . . . . . . . . . . . . . . . . -8V to +13V
Y, Z (V_CC > 3.6V) . . . . . . . . . . . . . . . . . . . . . . -0.5V to V_CC +0.5V
Short Circuit Duration
Y, Z (V_CC 3.6V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Y, Z (V_CC > 3.6V, Note 12) . . . . . . . . . . . . . . . . . . . 1s at <300mA
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . See Specification Table

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty.

Description

The Intersil ISL3293E, ISL3294E, ISL3295E, ISL3296E, ISL3297E, ISL3298E are 16.5kV HBM ESD Protected (7kV IEC61000 contact), 3.0V to 5.5V powered, single transmitters for balanced communication using the RS-485 and RS-422 standards. These drivers have very low bus currents (40mA), so they present less than a 1/8 unit load to the RS-485 bus. This allows more than 256 transmitters on the network without violating the RS-485 specifications 32 unit load maximum, and without using repeaters. Hot Plug circuitry ensures that the Tx outputs remain in a high impedance state while the power supply stabilizes. The ISL3293E, ISL3294E, ISL3296E, ISL3297E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or from unterminated stubs in multidrop and multipoint applications. Drivers on the ISL3295E and ISL3298E are not limited, so they can achieve the 20Mbps data rate. All versions are offered in Industrial and Extended Industrial (-40C to +125C) temperature ranges. A 26% smaller footprint is available with the ISL3296E, ISL3297E, ISL3298Es TDFN package. These devices also feature a logic supply pin (VL) that sets the switching points of the DE and DI inputs to be compatible with a lower supply voltage in mixed voltage systems. For companion single RS-485 receivers in micro packages, please see the ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E data sheet.