ISL12032

Features:

• 50/60 Cycle AC as a Primary Clock Input for RTC Timing
• Redundant Crystal Clock Input Selectable by User
- Dynamically Switch from AC Clock Input to Crystal in Case of Power Failure
• Real Time Clock/Calendar
- Tracks Time in Hours, Minutes, Seconds and tenths of a second
- Day of the Week, Day, Month, and Year
• Auto Daylight Saving Time Correction
- Programmable Forward and Backward Dates
• Security and Event Functions
- Event Detection with Time Stamp
- Stores First and Last Three Event Time Stamps
• Separate FOUT Pin
- 7 Selectable Frequency Outputs
• Dual Alarms with Hardware and Register Indicators
- Hardware Single Event or Pulse Interrupt Mode
• Automatic Backup to Battery or Super Capacitor
- VBAT Operation Down to 1.8V
- 1.0µA Battery Supply Current
• Two Battery Status Monitors with Selectable Levels
- Seven Selectable Voltages for Each Level
- 1st Level, Trip Points from 4.675V to 2.125V
- 2nd Level, Trip Points from 4.125V to 1.875V
• V_DD Power Brownout Monitor
- Six Selectable Trip Levels, from 4.675V to 2.295V
• Time Stamp during Power to Battery and Battery to Power Switchover
• Integrated Trickle Charger
- Four Selectable Charging Rates
• 128 Bytes Battery-Backed User SRAM
• I²C Interface
- 400kHz Data Transfer Rate
• Pb-free (RoHS compliant)




Application

• Utility Meters
• Control Applications
• Security Related Applications
• Vending Machines
• White Goods
• Consumer Electronics




Pinout






Specifications

Voltage on VDD, VBAT, SCL, SDA, ACRDY, AC, LV, EVDET, EVIN,
IRQ, FOUT pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 6.0V
Voltage on X1 and X2 pins
(respect to ground) . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 2.5V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3014) . . . . ......>2kV
Machine Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..>200V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty.
NOTE:
1. JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.




Description

The ISL12032 device is a low power real time clock with 50/60 AC input for timing synchronization. The ISL12032 also has an oscillator utilizing an external crystal for timing back-up, clock/calendar registers, intelligent battery back-up switching, battery voltage monitor, brownout indicator, integrated trickle charger for super capacitor, single periodic or polled alarms, POR supervisory function, and up to 4 Event Detect with time stamp. There are 128 bytes of battery-backed user SRAM. The oscillator uses a 50/60 cycle sine wave input, backed by an external, low-cost, 32.768kHz crystal. The real time clock tracks time with separate registers for hours, minutes, and seconds. The calendar registers contain the date, month, year, and day of the week. The calendar is accurate through year 2100, with automatic leap year correction and auto daylight savings correction.