Features: Fully-Integrated Solution
• Single-chip voice record/playback solution
• Dual storage of digital and analog data
• Durations
<8 to 16-minute (ISD5116)
<4 to 8-minute (ISD5108)
<2 to 4-minute (ISD5104)
<1 to 2-minute (ISD5102)
Low Power Consumption
• +2.7 to +3.3V (VCC) Supply Voltage
• Supports 2.0V and 3.0V interface logic
• Operating Current:
<ICC Play = 15 mA (typical)
<ICC Rec = 30 mA (typical)
<ICC Feedthrough = 12 mA (typical)
• Standby Current:
<ISB = 1A (typical)
• Most stages can be individually powered down to minimize power consumption
Enhanced Voice Features
• One or two-way conversation record
• One or two-way message playback
• Voice memo record and playback
• Private call screening
• In-terminal answering machine
• Personalized outgoing message
• Private call announce while on call
Digital Memory Features
• Up to 4 Mb available (ISD5116)
• Up to 2 Mb available (ISD5108)
• Up to 1 Mb available (ISD5104)
• Up to 512Kb available (ISD5102)
• Storage of phone numbers, system configuration parameters and message address table in cellular application
Easy-to-use and Control
• No compression algorithm development required
• User-controllable sampling rates
• Programmable analog interface
• Standard & Fast mode I2C serial interface (100kHz 400 kHz)
• Fully addressable for multiple messages
High Quality Solution
• High quality voice and music reproduction
• Winbond's standard 100-year message retention (typical)
• 100K record cycles (typical) for analog data
• 10K record cycles (typical) for digital data
Options
• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)
• Temperature: Commercial Packaged (0 to +70) & die (0 to +50); Industrial (-40 to +85)Pinout
Specifications(PACKAGED PARTS)(1)
Junction temperature .................................150
Storage temperature range........ -65 to +150
Voltage Applied to any pin........... (VSS - 0.3V) to (VCC + 0.3V)
Voltage applied to any pin (Input current limited to +/-20 mA)....(VSS 1.0V) to (VCC + 1.0V)
Lead temperature (soldering 10 seconds) ....300
VCC - VSS ......................................-0.3V to +5.5V
(DIE)(1)
Junction temperature........................................ 150
Storage temperature range ...............-65 to +150
Voltage Applied to any pad ....(VSS - 0.3V) to (VCC + 0.3V)
VCC - VSS ............................................-0.3V to +5.5V
1. Stresses above those listed may cause permanent damage to the device. Exposure to the absolute maximum ratings may affect device reliability. Functional operation is not implied at these conditions.
DescriptionThe ISD5100 ChipCorder Series provide high quality, fully integrated, single-chip Record/Playback solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones,automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port - address, control and duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.
The ISD5100 Series include:
• ISD5116 from 8 to 16 minutes
• ISD5108 from 4 to 8 minutes
• ISD5104 from 2 to 4 minutes
• ISD5102 from 1 to 2 minutes
Analog functions and audio gating have also been integrated into the ISD5100 Series products to allow easy interface with integrated digital cellular chip sets on the market. Audio paths have been designed to enable full duplex conversation record, voice memo, answering machine (including outgoing message playback) and call screening features. This product enables playback of messages while the phone is in standby, AND both simplex and duplex playback of messages while on a phone call.
Additional voice storage features for digital cellular phones include: 1) a personalized outgoing message can be sent to the person by getting caller-ID information from the host chipset, 2) a private call announce while on call can be heard from the host by giving caller-ID on call waiting information from the host chipset.
Logic Interface Options of 2.0V and 3.0V are supported by the ISD5100 Series to accommodate portable communication products (2.0- and 3.0-volt required).
Like other ChipCorder® products, the ISD5100 Series integrate the sampling clock, anti-aliasing and smoothing filters, and the multi-level storage array on a single-chip. For enhanced voice features, the ISD5100 Series eliminate external circuitry by integrating automatic gain control (AGC), a power amplifier/speaker driver, volume control, summing amplifiers, analog switches, and a car kit interface. Input level adjustable amplifiers are also included, providing a flexible interface for multiple applications.
Recordings are stored into on-chip nonvolatile memory cells, providing zero-power message storage.This unique, single-chip solution is made possible through Winbond's patented multilevel storage technology. Voice and audio signals are stored directly into solid-state memory in their natural,uncompressed form, providing superior quality on voice and music reproduction.
ISD5100 Data Sheet
