Features: • Two-Wire Serial Interface, I2CTM Compatible
Bi-directional data transfer protocol
• Wide Voltage Operation
Vcc = 1.8V to 5.5V
• 400 KHz (2.5V) and 1 MHz (5.0V) Compatible
• Low Power CMOS Technology
Standby Current less than 6 A (5.0V)
Read Current less than 2 mA (5.0V)
Write Current less than 3 mA (5.0V)
• Hardware Data Protection
Write Protect Pin
• Sequential Read Feature
• Filtered Inputs for Noise Suppression
• Self time write cycle with auto clear 5 ms max @ 2.5V
• Organization:
IS24C02A, 256x8 (one block of 256 bytes)
IS24C04A, 512x8 (two blocks of 256 bytes)
IS24C08A, 1024x8 (four blocks of 256 bytes)
IS24C16A, 2048x8 (eight blocks of 256 bytes)
• 16 Byte Page Write Buffer
• High Reliability
Endurance: 1,000,000 Cycles
Data Retention: 100 Years
• Commercial, Industrial and Automotive temperature ranges
• 8-pin PDIP, 8-pin SOIC, 8-pad DFN, 8-pin TSSOP, and 8-pin MSOP packages
• Lead-free availablePinout
SpecificationsVS Supply Voltage .........................0.5 to +6.5 V
VP Voltage on Any Pin ...................0.5 to Vcc + 0.5 V
TBIAS Temperature Under Bias...... 55 to +125
TSTG Storage Temperature ...........65 to +150
IOUT Output Current .....................5 mADescriptionThe IS24C02A, IS24C04A, IS24C08A, and IS24C16A are electrically erasable PROM devices that use the standard 2-wire interface for communications. The IS24C02A, IS24C04A,IS24C08A, and IS24C16A contain a memory array of 2K-bits (256 x 8), 4K-bits (512 x 8), 8K-bits (1,024 x 8), and 16K-bits (2,048 x 8), respectively.Each device is organized into 16 byte pages for page write mode.
This EEPROM IS24C08A operates in a wide voltage range of 1.8V to 5.5V to be compatible with most application voltages. ISSI designed this device family to be a practical, low-power 2-wire EEPROM solution. The devices IS24C08A are available in 8-pin PDIP, 8-pin SOIC, 8-pad DFN, 8-pin MSOP, and 8-pin TSSOP packages.
The IS24C02A/04A/08A/16A maintains compatibility with the popular 2-wire bus protocol, so it is easy to use in applications implementing this bus type. The simple bus consists of the Serial Clock wire (SCL) and the Serial Data wire (SDA). Using the bus, a Master device such as a microcontroller is usually connected to one or more Slave devices such as this device. The bit stream over the SDA line includes a series of bytes, which identifies a particular Slave device, an instruction, an address within that Slave device, and a series of data, if appropriate. The IS24C02A/04A/08A/16A has a
Write Protect pin (WP) to allow blocking of any write instruction transmitted over the bus.
IS24C08A Data Sheet
