IRS2110PBF

Maximum Operating Temperature : + 125 C
Packaging : Tube
Product : H-Bridge Drivers
Mounting Style : Through Hole
Supply Voltage - Max : 20 V
Supply Voltage - Min : 10 V
Rise Time : 35 ns
Fall Time : 25 ns
Type : High and Low Side
Maximum Power Dissipation : 1.6 W
Package / Case : PDIP-14
Supply Current : 0.34 mA


Features:

• Floating channel designed for bootstrap operation
• Fully operational to +500 V or +600 V
• Tolerant to negative transient voltage, dV/dt immune
• Gate drive supply range from 10 V to 20 V
• Undervoltage lockout for both channels
• 3.3 V logic compatible
• Separate logic supply range from 3.3 V to 20 V
• Logic and power ground ±5V offset
• CMOS Schmitt-triggered inputs with pull-down
• Cycle by cycle edge-triggered shutdown logic
• Matched propagation delay for both channels
• Outputs in phase with inputs




Specifications

Symbol	Definition		Min.	Max.	Units
VB	High side floating supply voltage	(IRS2110) (IRS2113)	-0.3 -0.3	520 (Note 1) 620 (Note 1)	V
VS VHO	High side floating supply offset voltage High side floating output voltage		VB - 20 VS - 0.3	VB + 0.3 VB + 0.3
VCC VLO VDD	Low side fixed supply voltage Low side output voltage Logic supply voltage		-0.3 -0.3 -0.3	20 (Note 1) VCC + 0.3 VSS+20 (Note 1)
VSS VIN	Logic supply offset voltage Logic input voltage (HIN, LIN, & SD)		VCC - 20 VSS - 0.3	VCC + 0.3 VDD + 0.3
dVs/dt	Allowable offset supply voltage transient (Fig. 2)		-	50	V/ns
PD	Package power dissipation @ TA +25	(14 lead DIP) (16 lead SOIC)	- -	1.6 1.25	W
RTHJA	Thermal resistance, junction to ambient	(14 lead DIP) (16 lead SOIC)	- -	75 100	/W
TJ TS TL	Junction temperature Storage temperature Lead temperature (soldering, 10 seconds)		- -55 -	150 150 300

Note 1: All supplies are fully tested at 25 V, and an internal 20 V clamp exists for each supply.

Description

The IRS2110PBF is designed as one kind of high voltage, high speed power MOSFET and IGBT driver that has some points of features:(1)Floating channel designed for bootstrap operation; (2)Fully operational to +500 V or +600 V; (3)Tolerant to negative transient voltage, dV/dt immune; (4)Gate drive supply range from 10 V to 20 V; (5)Undervoltage lockout for both channels; (6)3.3 V logic compatible; (7)Separate logic supply range from 3.3 V to 20 V; (8)Logic and power ground +/-5 V offset; (9)CMOS Schmitt-triggered inputs with pull-down; (10)Cycle by cycle edge-triggered shutdown logic; (11)Matched propagation delay for both channels; (12)Outputs in phase with inputs; (13)RoHS compliant.

The absolute maximum ratings of the IRS2110PBF can be summarized as:(1)High side floating absolute voltage: -0.3 V to 625 V;(2)High side floating supply offset voltage: VB-25 to VB+0.3 V;(3)High side floating output voltage: VS-0.3 to VB+0.3 V;(4)Low side and logic fixed supply voltage: -0.3 to 25 V;(5)Low side output voltage: -0.3 to VCC+0.3;(6)Logic input voltage (HIN & LIN): VSS-0.3 to VDD+0.3 V;(7)Allowable offset supply voltage transient: 50 V/ns;(8)Junction temperature: 150 °C;(9)Storage temperature: -50 to 150 °C;(10)Lead temperature (soldering, 10 seconds): 300 °C.

The electrical characteristics of IRS2110PBF can be summarized as:(1)High level output voltage: 0.2 V;(2)Low level output voltage: 0.02 to 0.10 V;(3)Offset supply leakage current: 50 uA;(4)Quiescent VBS supply current: 25 to 100 uA;(5)Quiescent VCC Supply Current: 80 to 180 uA.etc. If you want to know more information about the IRS2110PBF, please download the datasheet in www.seekic.com or www.chinaicmart.com .

Parameters:

Technical/Catalog Information	IRS2110PBF
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	High and Low Side, Independent
Voltage - Supply	10 V ~ 20 V
Current - Peak	2.5A
Delay Time	130ns
Package / Case	14-DIP (300 mil)
Packaging	Tube
Number of Outputs	2
Input Type	Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	500V
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IRS2110PBF IRS2110PBF