Features: ` Floating channel up to +600V or +1200V` soft over-current shutdown turns off all sixoutputs` Integrated high side desaturation circuit` Controlled soft turn on for EMI reduction` Integrated brake IGBT driver` Three independent low side COM pins` Separate pull-up/pull-down output dr...
IR2237(J)(Q): Features: ` Floating channel up to +600V or +1200V` soft over-current shutdown turns off all sixoutputs` Integrated high side desaturation circuit` Controlled soft turn on for EMI reduction` Int...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Definition |
Min. |
Max. |
Units |
VS1,2,3 |
High side floating supply voltage |
VB1,2,3 -25 |
VB1,2,3 +0.3 |
V |
VB1,2,3 | High side floating supply voltage (IR2137) |
-0.3 |
625 | |
(IR2237) |
-0.3 |
1225 | ||
VHO |
High side floating output voltage(HOP, HON, HSSD) |
VS1,2,3 - 0.3 |
VB1,2,3 + 0.3 | |
VCC |
Low side fixed supply voltage |
-0.3 |
25 | |
VSS |
Logic ground |
VCC - 25 |
VCC + 0.3 | |
VLO1,2,3 |
Low side output voltage (LOP, LON, LSSD) |
VLS1,2,3 -0.3 |
VCC + 0.3 | |
VIN |
Logic input voltage (HIN, LIN,SD, ITRIP, FLTCLR, BRIN) |
VSS - 0.3 |
(VSS + 15) or (VCC + 0.3) which ever is lower | |
VFLT |
FAULT output voltage |
VSS - 0.3 |
VCC + 0.3 | |
VDESAT |
DESAT input voltage |
VS1,2,3 - 0.3 |
VB1,2,3 + 0.3 | |
VBR |
BRAKE output voltage |
- 0.3 |
VCC + 0.3 | |
VLS1,2,3 | Low side output return voltage |
VCC - 25 |
VCC + 0.3 | |
dVs/dt |
Allowable offset supply voltage transient |
- |
50 |
V/ns |
PD |
Package power dissipation @ TA +25°C (MQFP64) |
- |
2.0 |
W |
(PLCC68) |
- |
3.0 | ||
RTHJA |
Thermal resistance, junction to ambient (MQFP64) |
- |
60 |
°C/W |
(PLCC68) |
- |
40 | ||
TJ |
Junction temperature |
- |
150 |
°C |
TS |
Storage temperature |
-55 |
150 | |
TL |
Lead temperature (soldering, 10 seconds) |
- |
300 |
The IR2137/IR2237(J)(Q) are a high voltage, high speed 3-phase IGBT driver best suited for AC motor drive applications. Integrated desaturation logic pro-
vides ground fault protection as well as other mode of over current protection. Soft shutdown is initiated in the event of any overcurrent/ground fault conditions, and all six outputs are simultaneously turned off. Out-put drivers of the IR2237(J)(Q) have separate turn on/off pins to facilitate independent gate drive impedance with EMI soft turn on. Optimum matched delays between phases, and between high/low side enables small deadtime, thus improving low speed performance. The brake driver eliminates additional circuits.