IR2214SSPBF

Product : Half-Bridge Drivers
Maximum Operating Temperature : + 125 C
Packaging : Tube
Type : High and Low Side Driver
Fall Time : 7 ns
Mounting Style : Through Hole
Supply Voltage - Max : 20 V
Package / Case : PDIP-14
Supply Current : 2.5 mA
Supply Voltage - Min : 11.5 V
Rise Time : 24 ns
Maximum Power Dissipation : 1500 mW


Features:

·Floating channel up to +600 V or +1200 V 
·Soft over-current shutdown 
·Synchronization signal to synchronize shutdown with the other phases 
·Integrated desaturation detection circuit 
·Two stage turn on output for di/dt control 
·Separate pull-up/pull-down output drive pins 
·Matched delay outputs 
·Undervoltage lockout with hysteresis band 
·LEAD-FREE


Specifications

Symbol	Definition		Min.	Max.	Units
VS	High side offset voltage		VB - 25	VB + 0.3	V
VB	High side floating supply voltage	(IR2114 or IR21141)	-0.3	625	V
		(IR2214 or IR22141)	-0.3	1225	V
VHO VCC COM VLO VIN	High side floating output voltage (HOP,HON and SSDH) Low side and logic fixed supply voltage Power ground Low side output voltage (LOP, LON and SSDL) Logic input voltage (HIN, LIN and FLT_CLR)		VS- 0.3 -0.3 VCC- 25 VCOM-0.3 VSS -0.3	VB + 0.3 25 VCC + 0.3 VCC + 0.3 VCC + 0.3	V V V V V
VFLT	FAULT input/output voltage (FAULT/SD and SY_FLT)		VSS-0.3	VCC + 0.3	V
VDSH VDSL	High side DS input voltage Low side DS input voltage		VS -3 VCOM -3	VB + 0.3 VCC + 0.3	V V
dVs/dt PD RthJA	Allowable offset voltage slew rate Package power dissipation @ TA 25 Thermal resistance, junction to ambient		- - -	50 1.5 65	V/ns W /W
TJ TS TL	Junction temperature Storage temperature Lead temperature (soldering, 10 seconds)		- -55 -	150 150 300

Description

The IR2214SSPbF gate driver family is suited to drive a single half bridge in power switching applications. These drivers provide high gate driving capability (2 A source, 3 A sink) and require low quiescent current, which allows the use of bootstrap power supply techniques in medium power systems. These drivers feature full short circuit protection by means of power transistor desaturation detection and manage all half-bridge faults by smoothly turning off the desaturated transistor through the dedicated soft shutdown pin, therefore preventing over-voltages and reducing EM emissions. In multi-phase systems of the IR2214SSPbF, the IR211(4,41)/ IR221(4,41) drivers  communicate using a dedicated local network (123456789SY_FLT and 123456789FAULT/SD signals) to properly manage phase-to-phase short circuits. The system controller may force shutdown or read device fault state through the 3.3 V compatible CMOS I/O pin (123456789FAULT/SD). To improve the signal immunity from DC-bus noise, the control and power ground use dedicated pins enabling low-side emitter current sensing as well. Undervoltage conditions in floating and low voltage circuits are managed independently. 
 

Parameters:

Technical/Catalog Information	IR2214SSPBF
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	Half Bridge
Voltage - Supply	11.5 V ~ 20 V
Current - Peak	2A
Delay Time	440ns
Package / Case	24-SSOP
Packaging	Tube
Number of Outputs	2
Input Type	Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	1200V
Drawing Number	*
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IR2214SSPBF IR2214SSPBF