IR2183

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Number of Outputs: 2
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Packaging: Tube
Number of Configurations: 1
Operating Temperature: -40°C ~ 125°C
Input Type: Inverting and Non-Inverting
Configuration: Half Bridge
Supplier Device Package: 8-DIP
High Side Voltage - Max (Bootstrap): 600V
Manufacturer: International Rectifier
Voltage - Supply: 10 V ~ 20 V
Delay Time: 180ns
Current - Peak: 1.9A


Features:

• Floating channel designed for bootstrap operation
   Fully operational to +600V
   Tolerant to negative transient voltage
   dV/dt immune
• Gate drive supply range from 10 to 20V
• Undervoltage lockout for both channels
• 3.3V and 5V input logic compatible
• Matched propagation delay for both channels
• Logic and power ground +/- 5V offset.
• Lower di/dt gate driver for better noise immunity
• Output source/sink current capability 1.4A/1.8A
• Also available LEAD-FREE (PbF)


Pinout




Specifications

Symbol	Definition		Min.	Max.	Units
VB	High side floating absolute voltage		-0.3	625	V
VS	High side floating supply offset voltage		VB - 25	VB + 0.3
VHO	High side floating output voltage		VS - 0.3	VB + 0.3
VCC	Low side and logic fixed supply voltage		-0.3	25
VLO	Low side output voltage		-0.3	VCC + 0.3
DT	Programmable dead-time pin voltage (IR21834 only)		VSS - 0.3	VCC + 0.3
VIN	Logic input voltage (HIN & LIN)		VSS - 0.3	VSS + 10
VSS	Logic ground (IR21834 only)		VCC - 25	VCC + 0.3
dVS/dt	Allowable offset supply voltage transient		-	50	V/ns
PD	Package power dissipation @ TA +25	(8 lead PDIP)	-	1.0	W
		(8 lead SOIC)	-	0.625
		(14 lead PDIP)	-	1.6
		(14 lead SOIC)	-	1.0
RthJA	Thermal resistance, junction to ambient	(8 lead PDIP)	-	125	/W
		(8 lead SOIC)	-	200
		(14 lead PDIP)	-	75
		(14 lead SOIC)	-	120
TJ	Junction temperature		-	150
TS	Storage temperature		-50	150
TL	Lead temperature (soldering, 10 seconds)		-	300

Description

The IR2183 are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input of the IR2183 is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.

Parameters:

Technical/Catalog Information	IR2183
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	Half Bridge
Voltage - Supply	10 V ~ 20 V
Current - Peak	1.9A
Delay Time	180ns
Package / Case	8-DIP (300 mil)
Packaging	Tube
Number of Outputs	2
Input Type	Inverting and Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR2183 IR2183