Features: • Intelligent half-bridge driver• Auto Resetting Short Circuit Protection• Auto Resetting Overload Protection• Externally Triggerable Latching Shutdown• Latching Overtemperature Protection• Frequency Modulation dither (for lower EMI)• Micropowe...
IR2161: Features: • Intelligent half-bridge driver• Auto Resetting Short Circuit Protection• Auto Resetting Overload Protection• Externally Triggerable Latching Shutdown• Latch...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Definition |
Min. |
Max. |
Units |
VB |
High side floating supply voltage |
-0.3 |
625 |
V |
VS |
High side floating supply offset voltage |
VB - 25 |
VB + 0.3 | |
VHO |
High side floating output voltage |
VS - 0.3 |
VB + 0.3 | |
VLO |
Low side output voltage |
-0.3 |
VCC + 0.3 | |
IOMAX |
Maximum allowable output current (HO,LO) due to external power transistor miller effect |
-500 |
500 |
mA |
VCSDMAX |
CSD pin voltage |
-0.3 |
VCC + 0.3 |
V |
VCS |
Current sense pin voltage |
-0.3 |
VCC + 0.3 | |
ICS |
Current sense pin current |
-5 |
5 |
mA |
ICC |
Supply current (Note 1) |
-20 |
20 | |
dV/dt |
Allowable offset voltage slew rate |
-50 |
50 |
V/ns |
PD |
Maximum power dissipation @ TA +25°C (8 Lead DIP) |
- |
1 |
W |
PD = (TJMAX-TA)/RthJA (8 Lead SOIC) |
- |
0.625 | ||
RthJA |
Thermal resistance, junction to ambient (8 Lead DIP) |
- |
125 |
°C/W |
(8 Lead SOIC) |
- |
200 | ||
TJ |
Junction temperature |
-55 |
150 |
°C |
TS |
Storage temperature |
-55 |
150 | |
TL |
Lead temperature (soldering, 10 seconds) |
- |
300 |
The IR2161 is a dedicated Intelligent Half bridge Driver IC for a Halogen convertor (electronic transformer). It includes all necessary protection features and also allows the Convertor to be dimmed externally with a standard phase cut dimmer with both leading or trailing edge types. This IC of the IR2161 provides the advantage of reduced thermal stress in the lamp due to softstart. There is also compensation of the output voltage for load regulation.It enables the convertor to operate with extremely low harmonic distortion over the full range of loads. The IR2161 includes adaptive deadtime to allow cool running MOSFETs and improves the EMI behaviour due to frequency modulation (dither). All the features are integrated in a small 8 pin DIP/SOIC package to allow for a size reduction in the next generation of convertors.