Features: • Ballast control and half-bridge driver in one IC• Transformer-less lamp power sensing• Closed-loop lamp power control• Closed-loop preheat current control• Programmable preheat time• Programmable preheat current• Programmable ignition-to-dim ti...
IR21591(S): Features: • Ballast control and half-bridge driver in one IC• Transformer-less lamp power sensing• Closed-loop lamp power control• Closed-loop preheat current control• ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Definition |
Min. |
Max. |
Units | |
VB |
High side floating supply voltage |
-0.3 |
625 |
V | |
VS |
High side floating supply offset voltage |
VB - 25 |
VB + 25 | ||
VHO |
High side floating output voltage |
VS - 0.3 |
VB + 0.3 | ||
VLO |
Low side output voltage |
-0.3 |
VCC + 0.3 | ||
IOMAX |
Maximum allowable output current (either output) due to external power transistor miller effect |
-500 |
500 |
mA | |
VVCO |
Voltage controlled oscillator input voltage |
-0.3 |
6.0 |
v | |
ICPH |
CPH current |
-5 |
5 |
mA | |
VIPH |
IPH voltage |
-0.3 |
5.5 |
V | |
VDIM |
Dimming control pin input voltage |
-0.3 |
5.5 | ||
VMAX |
Maximum lamp power setting pin input voltage |
-0.3 |
5.5 | ||
VMIN |
Minimum lamp power setting pin input voltage |
-0.3 |
5.5 | ||
VCS |
Current sense input voltage |
-0.3 |
5.5 | ||
ISD |
Shutdown pin current |
-5 |
2 |
mA | |
ICC |
Supply current (note 1) |
25 | |||
dV/dt |
Allowable offset voltage slew rate |
-50 |
50 |
V/ns | |
PD |
Package power dissipation @ TA +25°C |
(16 pin DIP) |
1.60 |
mA | |
PD = (TJMAX-TA)/RthJA |
(16 pin SOIC) |
1.25 | |||
RthJA |
Thermal resistance, junction to ambient |
(16 pin DIP) |
75 |
oC/W | |
(16 pin SOIC) |
115 | ||||
TJ |
-55 |
150 |
|||
Ts |
-55 |
150 |
oC | ||
TL |
300 |
Description: The IR21591(S) are complete dimming ballast controllers and 600V half-bridge drivers all in one IC. The architecture of the IR21591(S) includes phase control for transformer- less lamp power sensing and regulation which minimizes changes needed to adapt non-dimming ballasts for dimming. Externally programmable features such as preheat time and current, ignition-to-dim time, and a complete dimming interface with minimum and maximum settings provide a high degree of flexibility for the ballast design engineer. Protection from failure of a lamp to strike, filament failures, thermal overload, or lamp failure during normal operation, as well as an automatic restart function, have been included in the design. The heart of this control IC is a voltagecontrolled oscillator with externally programmable minimum frequency. The IR21591(S) are available in both 16 pin DIP and 16 pin narrow body SOIC packages.