Features: • Floating channel up to +600V or +1200V• soft over-current shutdown turns off desaturated output• Integrated desaturation circuit• Active biasing on sensing desaturation input• Two stage turn on output for di/dt control• Integrated brake IGBT driver...
IR21381Q: Features: • Floating channel up to +600V or +1200V• soft over-current shutdown turns off desaturated output• Integrated desaturation circuit• Active biasing on sensing desa...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Definition | Min. | Max. | Units | |
VS | High side offset voltage | VB 1,2,3 - 25 | VB 1,2,3 + 0.3 | V | |
VB | High side floating supply voltage | (IR22381) | -0.3 | 1225 | |
(IR21381) | -0.3 | 625 | |||
VHO | High side floating output voltage (HOP, HON, HOQ) | VS1,2,3 - 0.3 | VB 1,2,3 + 0.3 | ||
VCC | Low side and logic fixed supply voltage | -0.3 | 25 | ||
COM | Power ground | VCC - 25 | VCC + 0.3 | ||
VLO | Low side output voltage (LOP, LON, LOQ) | VCOM -0.3 | VCC + 0.3 | ||
VIN | Logic input voltage (HIN/N, LIN, BRIN/N, SD) | -0.3 | VCC + 0.3 or VSS +15 Which ever is lower | ||
VFLT | FAULT/N output voltage | -0.3 | VCC + 0.3 | ||
VF | Feedback output voltage | -0.3 | VCC + 0.3 | ||
VDSH | High side desat/feedback input voltage | VB 1,2,3 - 25 | VB 1,2,3 + 0.3 | ||
VDSL | Low side desat/feedback input voltage | VCC - 25 | VCC + 0.3 | ||
VBR | Brake output voltage | VCOM -0.3 | VCC + 0.3 | ||
dVs/dt | Allowable offset voltage slew rate | - | 50 | V/ns | |
PD | Package power dissipation @ TA +25 | - | 2.0 | W | |
RthJA | Thermal resistance, junction to ambient |
- | 60 | /W | |
TJ | Junction temperature | - | 125 | ||
TS | Storage temperature | -55 | 150 | ||
TL | Lead temperature (soldering, 10 seconds) | - | 300 |
Description The IR21381Q are high voltage, 3-phase IGBT driver best suited for AC motor drive applications. Integrated desaturation logic provides all mode of overcurrent protection, including ground fault protection. The sensing desaturation input is provided by active bias stage to reject noise. Soft shutdown is predominantly initiated in the event of overcurrent followed by turnoff of all six outputs. A shutdown input of the IR21381Q is provided for a customized shutdown function. The DT pin allows external resistor to program the deadtime. Output drivers have separate turn on/off pins with two stage turn-on output to achieve the desired di/dt switching level of IGBT. Voltage feedback provides accurate volt x second measurement.