IR21362

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Mounting Type: Through Hole
Packaging: Tube
Number of Configurations: 1
Operating Temperature: -40°C ~ 125°C
Input Type: Inverting and Non-Inverting
High Side Voltage - Max (Bootstrap): 600V
Number of Outputs: 3
Manufacturer: International Rectifier
Current - Peak: 200mA
Configuration: 3 Phase Bridge
Voltage - Supply: 11.5 V ~ 20 V
Delay Time: 425ns
Package / Case: 28-DIP (0.600", 15.24mm)
Supplier Device Package: 28-DIP


Features:

• Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage - dV/dt immune
•Gate drive supply range from 10 to 20V (IR2136/IR21368), 11.5 to 20V (IR21362) or 12 to 20V (IR21363/IR21365/IR21366/IR21367)
• Undervoltage lockout for all channels
• Over-current shutdown turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• Cross-conduction prevention logic
• Lowside outputs out of phase with inputs. High side outputs out of phase (IR2136/IR21363/IR21365/IR21366/IR21367/IR21368) or in phase (IR21362) with inputs.
• 3.3V logic compatible
• Lower di/dt gate driver for better noise immunity
• Externally programmable delay for automatic fault clear
• Also available LEAD-FREE



Pinout




Specifications

Symbol	Definition		Min.	Max.	Units
VS	High side offset voltage		VB1,2,3 - 25	VB1,2,3 + 0.3	V
VBS	High side floating supply voltage		-0.3	625
VHO	High side floating output voltage		VS1,2,3 - 0.3	VB1,2,3 + 0.3
VCC	Low side and logic fixed supply voltage		-0.3	25
VSS	Logic ground		VCC - 25	VCC + 0.3
VLO1,2,3	Low side output voltage		-0.3	VCC + 0.3
VIN	Input voltage LIN,HIN,ITRIP, EN, RCIN		VSS - 0.3	lower of (VSS + 15) or VCC + 0.3)
VFLT	FAULT output voltage		VSS - 0.3	VCC + 0.3
dV/dt	Allowable offset voltage slew rate		-	50	V/ns
PD	Package power dissipation @ TA +25	(28 lead PDIP)	-	1.5	W
		(28 lead SOIC)	-	1.6
		(44 leadPLCC)	-	2.0
RthJA	Thermal resistance, junction to ambient	(28 lead PDIP)	-	83	/W
		(28 lead SOIC)	-	78
		(44 leadPLCC)	-	63
TJ	Junction temperature		-	150
TS	Storage temperature			150
TL	Lead temperature (soldering, 10 seconds)		-	300

Description

The IR2136/IR21362/IR21363/IR21365/IR21366/IR21367/IR21368(J&S) are high votage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal of IR2136/IR21362/IR21363/IR21365/IR21366/IR21367/IR21368(J&S) is provided to indicate that an overcurrent or undervoltage shutdown has occurred. Overcurrent fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts.

Parameters:

Technical/Catalog Information	IR21362
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	3 Phase Bridge
Voltage - Supply	11.5 V ~ 20 V
Current - Peak	200mA
Delay Time	425ns
Package / Case	28-DIP (600 mil)
Packaging	Tube
Number of Outputs	3
Input Type	Inverting and Non-Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR21362 IR21362