IR2135S

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Mounting Type: Surface Mount
Packaging: Tube
Input Type: Inverting
Number of Configurations: 1
High Side Voltage - Max (Bootstrap): 600V
Number of Outputs: 3
Manufacturer: International Rectifier
Voltage - Supply: 10 V ~ 20 V
Current - Peak: 250mA
Delay Time: 750ns
Configuration: 3 Phase Bridge
Package / Case: 28-SOIC (0.295", 7.50mm Width)
Supplier Device Package: 28-SOIC W
Operating Temperature: -


Features:

• Floating channel designed for bootstrap operation Fully operational to +600V or+1200V Tolerant to negative transient voltage dV/dt immune
• Gate drive supply range from 10V/12V to 20V DC and up to 25V for transient
• Undervoltage lockout for all channels
• Over-current shut down turns off all six drivers
• Independent 3 half-bridge drivers
• Matched propagation delay for all channels
• 2.5V logic compatible
• Outputs out of phase with inputs
• Also available LEAD-FREE


Pinout

Specifications

Symbol	Definition		Min.	Max.	Units
VB1,2,3	High Side Floating Supply Voltage	(IR2133/IR2135)	-0.3	625	V
		(IR2233/IR2235)	-0.3	1225
VS1,2,3	High Side Floating Offset Voltage		VB1,2,3 - 25	VB1,2,3 + 0.3
VHO1,2,3	High Side Floating Output Voltage		VS1,2,3 - 0.3	VB1,2,3 + 0.3
VCC	Low Side and Logic Fixed Supply Voltage		-0.3	25
VSS	Logic Ground		VCC - 25	VCC + 0.3
VLO1,2,3	Low Side Output Voltage		-0.3	VCC + 0.3
VIN	Logic input voltage (HIN, LIN, ITRIP, SD & FLT-CLR)		VSS - 0.3	VCC + 0.3 or VSS +15 Which ever is lower
VIN,AMP	Op amp input voltage (CA+ & CA-)		VSS - 0.3	VCC + 0.3
VOUT,AMP	Op amp output voltage (CAO)		VSS - 0.3	VCC + 0.3
VFLT	FAULT Output Voltage		VSS - 0.3	VCC + 0.3
dVS/dt	Allowable Offset Supply Voltage Transient		-	50	V/ns
PD	Package Power Dissipation @ TA +25	(28 Lead DIP)	-	1.5	W
		(28 Lead SOIC)	-	1.6
		(44 Lead PLCC)	-	2.0
RthJA	Thermal Resistance, Junction to Ambient	(28 Lead DIP)	-	83	/W
		(28 Lead SOIC)	-	78
		(44 Lead PLCC)	-	63
TJ	Junction Temperature		-	150
TS	Storage Temperature		-55	150
TL	Lead temperature (soldering, 10 seconds		-	300

Description

The IR2133IR2135/IR2233IR2355 (J&S) are high voltage, high speed power MOSFET and IGBT driver with three independent high side and low side referenced output channels for 3-phase applications. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. An independent operational amplifier ofo  IR2133IR2135/IR2233IR2355 (J&S)  provides an analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs can also be derived from this resistor. A shutdown function is available to terminate all six outputs. An open drain  FAULT signal is provided to indicate that an over-current or undervoltage shutdown has occurred. Fault conditions are cleared with the  FLT-CLR lead. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 volts or 1200 volts.

Parameters:

Technical/Catalog Information	IR2135S
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	3 Phase Bridge
Voltage - Supply	10 V ~ 20 V
Current - Peak	200mA
Delay Time	750ns
Package / Case	28-SOIC (7.5mm Width)
Packaging	Tube
Number of Outputs	3
Input Type	Inverting
Number of Configurations	1
Operating Temperature	-
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR2135S IR2135S