IR2132

Series: -
Type: -
On-State Resistance: -
Current - Output / Channel: -
Current - Peak Output: -
Mounting Type: Through Hole
Packaging: Tube
Input Type: Inverting
Number of Configurations: 1
Operating Temperature: -40°C ~ 125°C
High Side Voltage - Max (Bootstrap): 600V
Number of Outputs: 3
Manufacturer: International Rectifier
Voltage - Supply: 10 V ~ 20 V
Current - Peak: 250mA
Configuration: 3 Phase Bridge
Delay Time: 675ns
Package / Case: 28-DIP (0.600", 15.24mm)
Supplier Device Package: 28-DIP


Features:

• Floating channel designed for bootstrap operation
  Fully operational to +600V
  Tolerant to negative transient voltage
  dV/dt immune
• Gate drive supply range from 10 to 20V
• Undervoltage lockout for all channels
• Over-current shutdown turns off all six drivers
• Independent half-bridge drivers
• Matched propagation delay for all channels
• 2.5V logic compatible
• Outputs out of phase with inputs
• Cross-conduction prevention logic
• Also available LEAD-FREE


Pinout




Specifications

Symbol	Definition		Min.	Max.	Units
VB1,2,3	High Side Floating Supply Voltage		-0.3	525	V
VS1,2,3	High Side Floating Offset Voltage		VB1,2,3 - 25	VB1,2,3 + 0.3
VHO1,2,3	High Side Floating Output Voltage		VS1,2,3 - 0.3	VB1,2,3 + 0.3
VCC	Low Side and Logic Fixed Supply Voltage		-0.3	25
VSS	Logic Ground		VCC - 25	VCC + 0.3
VLO1,2,3	Low Side Output Voltage		-0.3	VCC + 0.3
VIN	Logic Input Voltage (HIN1,2,3 ,LIN1,2,3 ,FLT -CLR, SD & ITRIP)		VSS - 0.3	VCC + 0.3 or VSS +15 Which ever is lower
VFLT	FAULT Output Voltage		VSS - 0.3	VCC + 0.3
VCAO	Operational Amplifier Output Voltage		VSS - 0.3	VCC + 0.3
VCA-	Operational Amplifier Inverting Input Voltage		VSS - 0.3	VCC + 0.3
dVS/dt	Allowable Offset Supply Voltage Transient		-	50	V/ns
PD	Package Power Dissipation @ TA +25	(28 Lead DIP)	-	1.5	W
		(28 Lead SOIC)	-	1.6
		(44 Lead PLCC)	-	2.0
RthJA	Thermal Resistance, Junction to Ambient	(28 Lead DIP)	-	83	/W
		(28 Lead SOIC)	-	78
		(44 Lead PLCC)	-	63
TJ	Junction Temperature		-	150
TS	Storage Temperature		-55	150
TL	Storage Temperature		-	300

Description

The IR2130/IR2132(J)(S) is a high voltage, high speed power MOSFET and IGBT driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor.

An open drain FAULT signal indicates if an over-current or undervoltage shutdown has occurred. The output of IR2130/IR2132(J)(S) drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operate up to 600 volts.

Parameters:

Technical/Catalog Information	IR2132
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Configuration	3 Phase Bridge
Voltage - Supply	10 V ~ 20 V
Current - Peak	250mA
Delay Time	675ns
Package / Case	28-DIP (600 mil)
Packaging	Tube
Number of Outputs	3
Input Type	Inverting
Number of Configurations	1
Operating Temperature	-40°C ~ 125°C
High Side Voltage - Max (Bootstrap)	600V
Lead Free Status	Contains Lead
RoHS Status	RoHS Non-Compliant
Other Names	IR2132 IR2132