Features: ·Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune·Gate drive supply range from 11.1 to 20V·Undervoltage lockout for all channels·Over-current shutdown turns off all six drivers·Independent half-bridge drivers...
IR21303C: Features: ·Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dV/dt immune·Gate drive supply range from 11.1 to 20V·Undervoltage lock...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Definition |
Min. |
Max. |
Units |
VB1,2,3 |
High Side Floating Supply Voltage |
-0.3 |
625 |
|
VS1,2,3 VHO1,2,3 VCC VSS VLO1,2,3 |
High Side Floating Offset Voltage High Side Floating Output Voltage Low Side and Logic Fixed Supply Voltage Logic Ground Low Side Output Voltage |
VB1,2,3-25 VS1,2,3-0.3 -0.3 VCC-25 -0.3 |
VB1,2,3+0.3 VB1,2,3+0.3 25 VCC + 0.3 VCC + 0.3 |
V |
VIN |
Logic Input Voltage ( HIN1,2,3,LIN1,2,3 & ITRIP) |
VSS-0.3 |
(VSS + 15) or (VCC + 0.3) whichever is lower |
V |
VFLT VCAO VCA- |
FAULT Output Voltage Operational Amplifier Output Voltage Operational Amplifier Inverting Input Voltage |
VSS-0.3 VSS-0.3 VSS-0.3 |
VCC + 0.3 VCC + 0.3 VCC + 0.3 |
V |
dVS/dt TJ |
Allowable Offset Supply Voltage Transient Junction Temperature |
- - |
5 15 |
V/ns |
The IR21303C is a high voltage, high speed power MOSFET and IGBT driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction.Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic. A ground-referenced operational amplifier of IR21303C provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain signal indicates if an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operate up to 600 volts.