IC DRIVER HALF-BRIDGE 8-DIP
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Series: | - | Manufacturer: | International Rectifier |
Configuration: | Half Bridge | Type: | - |
Input Type: | Non-Inverting | Delay Time: | 750ns |
Current - Peak: | 200mA | Package / Case : | TSSOP-14 |
On-State Resistance: | - | Current - Output / Channel: | - |
Number of Configurations: | 1 | Current - Peak Output: | - |
Number of Outputs: | 2 | High Side Voltage - Max (Bootstrap): | 600V |
Voltage - Supply: | 10 V ~ 20 V | Operating Temperature: | -40°C ~ 125°C |
Mounting Type: | Through Hole | Package / Case: | 8-DIP (0.300", 7.62mm) |
Supplier Device Package: | 8-DIP |
Symbol | Definition | Min. | Max. |
Units | |
VB | High side floating supply voltage | -0.3 | 625 | V | |
VS | High side floating supply offset voltage | VB - 25 |
VB + 0.3 | ||
VHO | High side floating output voltage | VS - 0.3 | VB + 0.3 | ||
VCC | Low side and logic fixed supply voltage | -0.3 | 25 | ||
VLO | Low side output voltage | -0.3 | VCC + 0.3 | ||
DT | Programmable dead-time pin voltage (IR21094 only) | VSS - 0.3 | VCC + 0.3 | ||
VIN | Logic input voltage(IN & SD) | VSS - 0.3 | VCC + 0.3 | ||
VSS | Logic ground (IR21094/IR21894 only) | VCC - 25 | VCC + 0.3 | ||
dVS/dt | Allowable offset supply voltage transient | - | 50 | V/ns | |
PD | Package power dissipation @ TA +25 | (8 lead PDIP) | - | 1.0 | W |
(8 lead SOIC) | - | 0.625 | |||
(14 lead PDIP) | - | 1.6 | |||
(14 lead SOIC) | - | 1.0 | |||
RthJA | Thermal resistance, junction to ambient | (8 lead PDIP) | - | 125 | /W |
(8 lead SOIC) | - | 200 | |||
(14 lead PDIP) | - | 75 | |||
(14 lead SOIC) | - | 120 | |||
TJ | Junction temperature | - | 150 | ||
TS | Storage temperature | -55 | 150 | ||
TL | Lead temperature (soldering, 10 seconds) | - | 300 |
The IR2109(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input of the IR2109 is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts.
Technical/Catalog Information | IR2109 |
Vendor | International Rectifier |
Category | Integrated Circuits (ICs) |
Configuration | Half Bridge |
Voltage - Supply | 10 V ~ 20 V |
Current - Peak | 200mA |
Delay Time | 750ns |
Package / Case | 8-DIP (300 mil) |
Packaging | Tube |
Number of Outputs | 2 |
Input Type | Non-Inverting |
Number of Configurations | 1 |
Operating Temperature | -40°C ~ 125°C |
High Side Voltage - Max (Bootstrap) | 600V |
Lead Free Status | Contains Lead |
RoHS Status | RoHS Non-Compliant |
Other Names | IR2109 IR2109 |