Features: • Simple primary side control solution to enable full-bridge DC-Bus Converters for 48V distributed systems with reduced component count and board space.• Frequency and dead time set by two external components• Maximum 500KHz per channel output with 50% duty cycle•...
IR2086S: Features: • Simple primary side control solution to enable full-bridge DC-Bus Converters for 48V distributed systems with reduced component count and board space.• Frequency and dead tim...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Definition | Min. | Max. | Units |
VCC | Low side supply voltage | -0.3 | 25 | Vdc |
VB1,2 | High side floating supply voltage | -0.3 | 150 | |
VS1,2 | High side floating supply offset voltage | VB1,2 - 25 | VB1,2 + 0.3 | |
VHO1,2 | High side floating output voltage | VB1,2 - 0.3 | VB1,2 + 0.3 | |
VLO1,2 | Low side output voltage | -0.3 | VCC + 0.3 | |
VCT | CT pin voltage | -0.3 | VCC + 0.3 | |
VCS | Cs pin voltage | -0.3 | VCC + 0.3 | |
VDELAY | Delay pin voltage | -0.3 | VCC + 0.3 | |
dVS/dt | Allowable offset voltage slew rate | -50 | +50 | V/ns |
ICC | Supply current | - | 40 | mA |
PD | Package power dissipation (16-lead SOIC) | - | 1.0 | W |
RthJA | Thermal resistance, junction to ambient (16-lead SOIC) | - | 200 | /W |
TJ | Junction temperature | -55 | 150 | |
TS | Storage temperature | -55 | 150 | |
TL | Lead temperature (soldering, 10 seconds) | - | 300 |
The IR2086S is a self oscillating full-bridge controller and driver IC with 50% duty cycle ideally suited for 36V-75V full-bridge DC Bus Converters. Dead time can be controlled through proper selection of CT and can range from 50 to 200nsec. Internal soft start increases pulse width on power up and maintains equal pulse widths for the high and low outputs throughout the start up cycle. Undervoltage lockout prevents operation if Vcc is less than 7.5 Vdc. Over current shutdown occurs when the voltage on the Cs pin exceeds 200mV. Restart after overcurrent trip can be delayed by adjusting the external capacitor. The delay time of IR2086S ranges from 10µs to 1s.