Features: • PFC with IR proprietary One Cycle Control • Continuous conduction mode (CCM) boost type PFC• No line voltage sense required• Programmable switching frequency (50kHz-200kHz)• Programmable output overvoltage protection• Brownout and output undervoltag...
IR1150IS: Features: • PFC with IR proprietary One Cycle Control • Continuous conduction mode (CCM) boost type PFC• No line voltage sense required• Programmable switching frequency (50...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Features: Junction Size: Square 110 milsWafer Size:4 VRRM Class: 1200 VPassivation Process: Glassi...
Parameters | Symbols | Min. | Max. | Units | Remarks |
VCC voltage | VCC |
-0.3 | 22 | V | |
Freq. voltage | VFREQ. | -0.3 | 10.5 | V | |
ISNS voltage | VISNS | -10 | 3 | V | |
VFB voltage | VFB | -0.3 | 10.5 | V | |
COMP voltage | VCOMP | -0.3 | 10 | V | |
Gate voltage | VGATE | -0.3 | 18 | V | |
Continuous gate current | IGATE | -5 | 5 | mA | |
Max peak gate current | IGATEPK | -1.5 | 1.5 | A | |
Junction temperature | TJ |
-40 | 150 | ||
Storage temperature | TS | -55 | 150 | ||
Thermal resistance | RJA | - |
128 | /W | SOIC-8 |
Package power dissipation | PD | - | 675 | mW | SOIC-8 TAMB = 25 |
ESD protection | VESD | - | 2 | kV | Human body model* |
The IR1150IS is a power factor correction (PFC) control IC designed to operate in continuous conduction mode (CCM) over a wide range input line voltages. The IR1150 is based on IR's proprietary "One Cycle Control" (OCC) technique providing a cost effective solution for PFC. The proprietary control method allows major reductions in component count, PCB area and design time while delivering the same high system performance as traditional solutions.
The IC of the IR1150IS is fully protected and eliminates the often noise sensitive line voltage sensing requirements of existing solutions.
The IR1150IS features include programmable switching frequency, programmable dedicated over voltage protection, soft start, cycle-by-cycle peak current limit, brownout, open loop, UVLO and micropower startup current.
In addition, for low standby power requirements (Energy Star, 1W Standby, Blue Angel, etc.), the IC of the IR1150IS can be driven into sleep mode with total current consumption below 200µA, by pulling the OVP pin below 0.62V.