IPS6031S

Features:






Specifications






Description

      Here I will show you a product named IPS6031S. The IPS6031S is a widely used kind of product. First of all, let me show the description of the IPS6031S to you. The IPS6031S PbF is a five terminal Intelligent Power Switch (IPS) for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The overtemperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7°C below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground. After reading the description of the IPS6031S, you may not know it well, so I will give you more information of the IPS6031S to you. The following is the features of the IPS6031S.
      The IPS6031S has nine features. The following is the features that showed to you. The first feature is over temperature shutdown which is with auto-restart. The second feature is short circuit protection which is current limit. The third feature is reverse battery protection which is turns on the MOSFET. The fourth feature is full diagnostic capability which is short circuit to battery. The fifth feature is active clamp. The sixth feature is open load detection in On and Off state. The seventh feature is ground loss protection. The eighth feature is logic ground isolated from power ground. The ninth feature is ESD protection.
      In addition, I will show you the absolute maximum ratings of the IPS6031S. The first absolute maximum rating is maximum output voltage which is Vcc+0.3v. The second absolute maximum rating is maximum logic ground to load ground offset which is Vcc+0.3v. The third absolute maximum rating is maximum input voltage which is 5.5v. The fourth absolute maximum rating is maximum Vcc voltage which is 36v. The fifth absolute maximum rating is maximum continuous Vcc voltage which is ⎯ 28v. The sixth absolute maximum rating is maximum Vcc voltage with short circuit protection which is 30V. The seventh absolute maximum rating is maximum IN current which is 10 mA. The eighth absolute maximum rating is maximum diagnostic output current which is 10mA. The ninth absolute maximum rating is maximum diagnostic output voltage which is 5.5 V. The tenth absolute maximum rating of the IPS6031S is maximum power dissipation and it is internally limited by thermal protection, which is 25W. The eleventh absolute maximum rating is electrostatic discharge voltage and it is human body, and the condition is C=100pF, R=1500, which is 1500V. The twelfth absolute maximum rating is electrostatic discharge voltage and the condition is C=200pF,R=0,L=10H, which is 100V. The thirteenth absolute maximum rating is maximum storage and operating temperature junction temperature which is 150 °C.