IPS6021RPBF

Maximum Operating Temperature :
Mounting Style : SMD/SMT
Supply Voltage - Min : 4 V
Packaging : Tube
Product : H-Bridge Drivers
Supply Voltage - Max : 5.5 V
Type : High Side
Rise Time : 10 us
Supply Current : 10 mA
Maximum Power Dissipation : 2.5 W
Fall Time : 15 us
Package / Case : DPAK-5


Features:

• Over temperature shutdown (with auto-restart)
• Short circuit protection (current limit)
• Reverse battery protection (turns On the MOSFET)
• Full diagnostic capability (short circuit to battery)
• Active clamp
• Open load detection in On and Off state
• Ground loss protection
• Logic ground isolated from power ground
• ESD protection




Specifications

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to Ground lead. (Tambient=25°C unless otherwise specified).

Symbol	Parameter	Min.	Max.	Units
Vout	Maximum output voltage	Vcc-35	Vcc+0.3
Voffset	Maximum logic ground to load ground offset	Vcc-35	Vcc+0.3	V
Vin	Maximum input voltage	-0.3	5.5
Vcc max.	Maximum Vcc voltage	-	36
Vcc cont.	Maximum continuous Vcc voltage	-	28
Vcc sc.	Maximum Vcc voltage with short circuit protection	-	28
Iin max.	Maximum IN current	-3	10	mA
Idg max.	Maximum diagnostic output current	-3	10
Vdg	Maximum diagnostic output voltage	-0.3	5.5	V
Pd	Maximum power dissipation (internally limited by thermal protection) Rth=5/W IPS6021	-	25	W
	Rth=40/W IPS6021S 1"sqrt. footprint	-	3.1
	Rth=50/W IPS6021R 1"sqrt. footprint	-	2.5
ESD	Electrostatic discharge voltage (Human body) C=100pF, R=1500 Between In and Vcc	-	1500	V
	Other combinations		4000
	Electrostatic discharge voltage (Machine Model) C=200pF,R=0,L=10H Between In and Vcc	-	100
	Other combinations	-	500
Tj max.	Max. storage & operating temperature junction temperature	-40	150
Tsoldering	Soldering temperature (10 seconds)	-	300

Description

The IPS6021RPbF is a five terminal Intelligent Power Switch (IPS) for usein a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7 below the Tshutdown value. The reverse battery protection of the IPS6021RPbF turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground.

Parameters:

Technical/Catalog Information	IPS6021RPBF
Vendor	International Rectifier
Category	Integrated Circuits (ICs)
Package / Case	DPak, TO-252 (4 leads + tab)
Mounting Type	Surface Mount
Type	High Side
Voltage - Supply	6 V ~ 28 V
On-State Resistance	24 mOhm
Current - Output / Channel	3.9A
Current - Peak Output	32A
Packaging	Tube
Input Type	Non-Inverting
Number of Outputs	1
Operating Temperature	-40°C ~ 150°C
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	IPS6021RPBF IPS6021RPBF