Features: ` COMPLETE CURRENT SENSE SOLUTION
` 0.6V INTERNAL VOLTAGE REFERENCE
` INTERNAL OPEN-DRAIN COMPARATOR
` LATCHING CAPABILITY ON COMPARATOR
` COMMON-MODE RANGE: −16V to +80V
` HIGH ACCURACY: 3.5% MAX ERROR OVER TEMPERATURE
` BANDWIDTH: 500kHz (INA200)
` QUIESCENT CURRENT: 1800A (max)
` PACKAGES: SO-8, MSOP-8Application· NOTEBOOK COMPUTERS
· CELL PHONES
· TELECOM EQUIPMENT
· AUTOMOTIVE
· POWER MANAGEMENT
· BATTERY CHARGERS
· WELDING EQUIPMENTPinout
SpecificationsSupply Voltage, V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 18V
Current-Shunt Monitor Analog Inputs, VIN+, VIN−
Differential (VIN+) − (VIN−) . . . . . . . . . . . . . . . . . . . . .. . −18V to +18V
Common Mode(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −16V to +80V
Comparator Analog Input and Reset Pins(2) .. GND − 0.3V to (V+) + 0.3V
Analog Output, Out(2) . . . . . . . . . . . . . . . . . . GND − 0.3V to (V+) + 0.3V
Comparator Output, Out Pin(2) . . . . . . . . . . . . . . . . . . GND − 0.3V to 18V
Input Current Into Any Pin(2) . . . . . . . . . . . . . . . . .. .. . . . . . . . . . . . 5mA
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . .. −55 to +150
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . .−65 to +150
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150
ESD Ratings:
Human Body Model (HBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000V
Charged Device Model (CDM) . . . . . . . . . . . . . . . . . . . . . . . . .. . . 1000V
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not supported.
(2) This voltage may exceed the ratings shown if the current at that pin is limited to 5mA.
DescriptionThe INA200, INA201, and INA202 are high-side current-shunt monitors with voltage output. The INA200−INA202 can sense drops across shunts at common-mode voltages from −16V to 80V. The INA200−INA202 are available with three output voltage scales: 20V/V, 50V/V, and 100V/V, with up to 500kHz bandwidth.
The INA200, INA201, and INA202 also incorporate an open-drain comparator and internal reference providing a 0.6V threshold. External dividers are used to set the current trip point. The comparator includes a latching capability, which can be made transparent by grounding (or leaving open) the RESET pin.
The INA200, INA201, and INA202 operate from a single +2.7V to +18V supply, drawing a maximum of 1800A of supply current. Package options include the very small MSOP-8 and the SO-8. All versions are specified over the extended operating temperature range of −40 to +125.
INA200 Data Sheet
