Minimum Operating Temperature
: - 40 C
Operating Supply Voltage
: 36 V
Number of Channels
: 1
Available Set Gain
: 80 dB
Maximum Operating Temperature
: + 85 C
Packaging
: Tube
Input Offset Voltage
: 125 uV
Maximum Input Resistance
: 10000 MOhms
Common Mode Rejection Ratio (Min)
: 106 dB
Package / Case
: PDIP-8
Supply Current
: 3 mA
Pinout
DescriptionThe INA114AP is a low cost, general purpose instrumentation amplifier offering excellent accuracy. The features of INA114AP are: (1)low offset voltage: 50mV max; (2)low drift: 0.25mV/°C max; (3)low input bias current: 2nA max; (4)high common-mode rejection: 115dB min; (5)input over-voltage protection: ±40V; (6)wide supply range: ±2.25 to ±18V; (7)low quiescent current: 3mA max; (8)8-PIN plastic and SOL-16.
The following is about the absolute maximum ratings of INA114AP: (1)Supply Voltage: ±18V; (2)Input Voltage Range: ±40V; (3)Output Short-Circuit (to ground): Continuous; (4)Operating Temperature: 40°C to +125°C; (5)Storage Temperature: 40°C to +125°C; (6)Junction Temperature: +150°C; (7)Lead Temperature (soldering, 10s): +300°C.
The electrical characteristics of the INA114AP are: (1)Offset Voltage, RTI: Initial: ±10 + 20/G V typ and ±50 + 100/G V max at TA = +25°C; (2)vs Temperature: ±0.1 + 0.5/G V/ typ and ±0.25 + 5/G V/ max at TA = TMIN to TMAX; (3)vs Power Supply: 0.5 + 2/G V/V typ and 3 + 10/G V/V max at VS = ±2.25V to ±18V; (4)Long-Term Stability: ±0.2 + 0.5/G V/mo typ; (5)Impedance, Differential: 1010 || 6 || pF; (6)Common-Mode: 1010 || 6 || pF; (7)Input Common-Mode Range: ±11 V min and ±13.5 V typ; (8)Safe Input Voltage: ±40 V max; (9)Common-Mode Rejection: 80dB min and 96dB typ at VCM = ±10V, DRS = 1k, G = 1.
Parameters: | Technical/Catalog Information | INA114AP |
| Vendor | Texas Instruments |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Instrumentation |
| Number of Circuits | 1 - Single |
| Package / Case | 8-DIP (300 mil) |
| Slew Rate | 0.6 V/s |
| Gain Bandwidth Product | - |
| Current - Supply | 2.2mA |
| Current - Output / Channel | 20mA |
| Voltage - Supply, Single/Dual (±) | 4.5 V ~ 36 V, ±2.25 V ~ 18 V |
| Output Type | - |
| -3db Bandwidth | 1MHz |
| Current - Input Bias | 500pA |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Input Offset | 25V |
| Drawing Number | 296; 4040082; P; 8 |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | INA114AP
INA114AP
|
INA114AP Data Sheet
