Features: • Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 µA• High Noise Immunity Characteristic of CMOS DevicesPinoutSpecifications Symbol Parameter Value Unit VCCVINVOUT DC Supply...
IN74HC299A: Features: • Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 µA• High Noise Immunity Characteristic of C...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol | Parameter |
Value |
Unit |
VCC VIN VOUT |
DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) |
-0.5 to +7.0 -1.5 to VCC +1.5 -0.5 to VCC +0.5 |
V V V |
IIN IOUT ICC |
DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins |
±20 ±35 ±75 |
mA mA mA |
PD |
Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ |
750 500 |
mA |
Tstg |
Storage Temperature |
-65 to +150 |
|
TL |
Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
The IN74HC299A is identical in pinout to the LS/ALS299. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs.
The IN74HC299A features a multiplexed parallel input/output data port to achieve full 8-bit handling in a 20 pin package. Due to the large output drive capability and the 3-state feature, this device is ideally suited for interface with bus lines in a bus-oriented system.
Two Mode-Select inputs and two Output Enable inputs of the IN74HC299A are used to choose the mode of operation as listed in the Function Table. Synchronous parallel loading is accomplished by taking both Mode- Select lines, S1 and S2, high. This places the outputs in the highimpedance state, which permits data applied to the data port to be clocked into the register. Reading out of the register can be accomplished when the outputs are enabled. The active-low asynchronous Reset overrides all other inputs.