IN74AC623

Features:

• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 A; 0.1 A @ 25
• High Noise Immunity Characteristic of CMOS Devices
• Outputs Source/Sink 24 mA


Pinout




Specifications

Symbol	Parameter	Value	Unit
VCC	DC Supply Voltage (Referenced to GND)	-0.5 to +7.0	V
VIN	DC Input Voltage (Referenced to GND)	-0.5 to VCC +0.5	V
VOUT	DC Output Voltage (Referenced to GND)	-0.5 to VCC +0.5	V
IIN	DC Input Current, per Pin	±20	mA
IOUT	DC Output Sink/Source Current, per Pin	±50	mA
ICC	DC Supply Current, VCC and GND Pins	±50	mA
PD	Power Dissipation in Still Air, Plastic DIP+ SOIC Package+	750 500	mW
TSTG	Storage Temperature	-65 to +150
TL	Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package)	260

*Maximum Ratings are those values beyond which damage to the device may occur.
  Functional operation should be restricted to the Recommended Operating Conditions.
  +Derating - Plastic DIP: - 10 mW/ from 65° to 125
             SOIC Package: : - 7 mW/ from 65° to 125



Description

The IN74AC623 is identical in pinout to the LS/ALS623, HC/HCT623. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs.

The IN74AC623 is a 3-state noninverting transceiver that is used for 2-way communication between data buses. Two separate enables are available. The enable for bus A to B is active-high, the enable for bus B to A is active-low.