Features: • Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 A; 0.1 A @ 25• High Noise Immunity Characteristic of CMOS Devices• Outputs Source/Sink 24 mASpecifications Symbol Parameter Value ...
IN74AC534: Features: • Outputs Directly Interface to CMOS, NMOS, and TTL• Operating Voltage Range: 2.0 to 6.0 V• Low Input Current: 1.0 A; 0.1 A @ 25• High Noise Immunity Characteristic...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
Value |
UNIT |
VCC |
DC Supply Voltage (Referenced to GND) |
-0.5 to +7.0 |
V |
VIN |
DC Input Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
VOUT |
DC Output Voltage (Referenced to GND) |
-0.5 to VCC +0.5 |
V |
IIN |
DC Input Current, per Pin |
±20 |
mA |
IOUT |
DC Output Sink/Source Current, per Pin |
±50 |
mA |
ICC |
DC Supply Current, VCC and GND Pins |
±50 |
mA |
PD |
Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ |
750 500 |
mW |
Tstg |
Storage Temperature |
-65 to +150 |
|
TL |
Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) |
260 |
The IN74AC534 is identical in pinout to the LS/ALS534, HC/HCT534. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALS outputs.
Data meeting the setup time of the IN74AC534 is clocked, in inverted form, to the outputs with the rising edge of the Clock. The Output Enable input does not affect the states of the flip-flops, but when Output Enable is high, the outputs are forced to the high impedance state. Thus, data may be stored even when the outputs are not enabled.