ILD223T

Current Transfer Ratio :
Maximum Collector Current :
Minimum Operating Temperature : - 55 C
Packaging : Reel
Maximum Operating Temperature : + 100 C
Maximum Power Dissipation : 250 mW
Input Type : DC
Maximum Forward Diode Voltage : 1.3 V
Maximum Collector Emitter Voltage : 30 V
Package / Case : SOIC-8 Narrow
Maximum Collector Emitter Saturation Voltage : 1000 mV
Isolation Voltage : 4000 Vrms


Features:

• Two Channel Optocoupler
• High Current Transfer Ratio at I_F=1.0 mA, 500% Min.
• Isolation Test Voltage, 3000 V RMS
• Electrical Specifications Similar to Standard 6-pin Coupler
• Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering
• SOIC-8 Surface Mountable Package
• Standard Lead Spacing, .05"
• Available only on Tape and Reel Option (Conforms to EIA Standard 481-2)
• Underwriters Lab File #E52744




Pinout






Specifications

Peak Reverse Voltage ................................... 6.0 V
Peak Pulsed Current (1.0µs, 300 pps) ........... 3.0 A
Continuous Forward Current per Channel .... 30 mA
Power Dissipation at 25°C............................45 mW
Derate Linearly from 25°C.................... 0.4 mW/°C




Description

The ILD223T is a high current transfer ratio (CTR) optocoupler. It has a Gallium Arsenide infrared LED emitter and a silicon NPN photodarlington transistor detector.

This device has CTRs tested at an LED current of 1.0 mA. This low drive current permits easy interfacing from CMOS to LSTTL or TTL.

The ILD223T is constructed in a standard SOIC-8A foot print which makes it ideally suited for high density applications. In addition to eliminating throughholes requirements, this package conforms to standards for surface mounted devices.