Features: • Operate from a rectified 220 VAC line source.• Oscillation frequency: 600 kHz.• Output voltage external setting (FB) type available.FB terminal voltage (VFB) 1.0 V.• Minimum of external components. The only peripheral components that can be used with IC are a co...
IL700D: Features: • Operate from a rectified 220 VAC line source.• Oscillation frequency: 600 kHz.• Output voltage external setting (FB) type available.FB terminal voltage (VFB) 1.0 V.R...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Item |
Symbol |
Ratings |
Units |
Vdd pin voltage |
Vdd |
Vss-0.3 to 16 |
V |
VddHV pin voltage |
VddHV |
Vss-0.3 to 450 |
V |
DRAIN pin voltage |
VDRAIN |
Vss-0.3 to 700 |
V |
DRAIN pin current |
IDRAIN |
300 |
mA |
FB pin voltage |
VFB |
Vss-0.3 to 16 V |
|
CVREF pin voltage |
VCVREF |
Vss-0.3 to Vdd+0.3 |
V |
CSS pin voltage |
VCSS |
Vss-0.3 to Vdd+0.3 |
V |
SENSE pin voltage |
VSENSE |
Vss-0.3 to Vdd+0.3 |
V |
Vz pin voltage |
Vz |
Vss-0.3 to Vdd+0.3 |
V |
Power dissipation |
PD |
650 |
mW |
The IL700D is a monolithic high voltage switching regulator-controllers with PWM/PFM control that is specifically designed to operate from a rectified 220 VAC line source. This device contain a reference voltage source, oscillation circuit, error amplifier, phase compensation circuit, PWM control circuit, power supply 450 V MOS-transistor, 700 V DMOS power switch, and other components. Since the oscillation frequency is a high 600 kHz, with the addition of a small external component, the IC can function as switching regulator with high efficiency.
The IL700D provides low-ripple power, high-efficiency, and excellent transient characteristics thanks to a PWM control circuit capable of varying the duty ratio linearly from 0% to 82% and optimized error amplifier, and phase compensation circuit.
The IL700D contains a PWM/PFM switching control circuit so that it operates using PWM control with a duty ratio of 27% or higher and using PFM control with a duty ratio of lower than 27% to ensure high efficiency in all load ranges.