IL350T

Minimum Operating Temperature :
Input Type : AC
Maximum Forward Diode Voltage : 2.1 V
Maximum Reverse Diode Voltage : 3 V
Maximum Input Diode Current : 30 mA
Maximum Power Dissipation : 250 mW
Maximum Operating Temperature : + 75 C
Package / Case : SMD-8
Packaging : Reel


Features:

• 2 mm High SMT Package
• High Sensitivity (K1) at Low Operating LED Current
• Couples AC and DC Signals
• Low Input-Output Capacitance
• Isolation Voltage, 2500 V_RMS
• Low Distortion
• Available in Tape and Reel (suffix T)


Application

• Optical DAA for V.34 FAX/Modem PCMCIA Cards
• Digital Telephone Line Isolation


Specifications

Emitter	Sym	Min.	Max.	Units
Reverse Voltage	VR		3	V
Forward Current	F I		30	mA
Surge Current Pulse Width <10s	IPK		150	mA
Power Dissipation, TA=25°C	PLED		150	mW
Dearate Linearly from 25°C			2	mW/°C
Junction Temperature	TJ		100	°C
Detector (each)
Reverse Voltage	VR		15	V
Forward Current	P		50	mW
Surge Current Pulse Width <m1s0			0.65	mW/°C
Junction Temperature	TJ		100	°C
Coupler
Isolation Test Voltage	VISOL	2500		VRMS
Total Package Power Dissipation	Pt		250	mW
Derate Linearly from 25°C			2.8	mW/°C
Storage Temperature	TS	40	150	°C
Operating Temperature	TOP	0	75	°C
Lead Soldering Time at 260°C			10	sec.
Isolation Resistance VIO=500 V, TA=25°C VIO=500 V, TA=100°C		1012
		1011

Description

The IL350T family of Linear Optocoupler consist of an IRLED optically coupled to two photodiodes. The emitter mechanically faces both diodes enabling them to receive approximately an equal amount of infrared light. The diodes produce a proportional amount of photocurrents. The ratio of the photocurrents stays constant with high accuracy when either the LED current changes or the ambient temperature changes. Thus one can control the output diode current optically by controlling the input photodiode current.

The IL350T optocouplers can be used with the aid of operational amplifiers in closed loop conditions to achieve highly linear and electrically isolated AC and or DC signal amplifiers.