IL212AT

Maximum Collector Emitter Saturation Voltage : 0.4 V
Minimum Operating Temperature : - 55 C
Packaging : Reel
Maximum Forward Diode Voltage : 1.5 V
Maximum Operating Temperature : + 100 C
Input Type : DC
Maximum Collector Emitter Voltage : 30 V
Maximum Collector Current : 100 mA
Current Transfer Ratio : 80 %
Package / Case : SOIC-8 Narrow
Isolation Voltage : 4000 Vrms
Maximum Power Dissipation : 240 mW


Features:

• High Current Transfer Ratio IL211AT-20% Minimum IL212AT-50% Minimum IL213AT-100% Minimum
• Isolation Voltage, 2500 VACRMS
• Electrical Specifications Similar to Standard 6 Pin Coupler
• Industry Standard SOIC-8 Surface Mountable Package
• Standard Lead Spacing, .05"
• Available in Tape and Reel (suffix T) (Conforms to EIA Standard RS481A)
• Compatible with Dual Wave, Vapor Phase and IR Reflow Soldering
• Underwriters Lab File #E52744 (Code Letter P)




Specifications

Peak Reverse Voltage .......................................6.0 V
Continuous Forward Current .......................... 60 mA
Power Dissipation at 25°C ............................90 mW
Derate Linearly from 25°C .....................1.2 mW/°C




Description

The IL212AT are optically coupled pairs with a Gallium Arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The IL212AT comes in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices.

A choice of 20, 50, and 100% minimum CTR at I_F=10 mA makes these optocouplers suitable for a variety of different applications.