Features: 1. Compliant with DIN StandardComply with IEC603-2/DIN41612 standard.
2. Variation in number of contacts10, 16, 20, 24, 28, 30, 32, 44, 48, 50, 64, 90, 96, 100, 128, and144 contacts are
available.
3. Two point contact constructionPCN10 and 12 series are constructed with high reliable double-sided two point
contacts.PCN13 series pursues after cost performance, and constructedwith single sided two point contacts.
4. Broad applicationsDIN standard types of B, C, R, and Q are available. The flux tightproduct is available.
Theeasylock pin type to prefix the board isavailable.
5. Stacking height variationPCN10H series contains 25, 30, 35, 40 and 45mm stackingheight.
6. Circuit protection function availablePCN10MC series utilizes a sequence structure for circuitprotection function.
7. Cable connectorID connector for ribbon cable is available.The connector is prepared for crimping connection for
AWC#26to 30 cables.
ApplicationControl equipment, exchange, measuring instruments etc.Specifications
| Rating |
Currentrating:2AVoltagerating: 300VAC |
Operating Temperature Range: -55 to +85ç(Note1)
Operating Humidity Range: 85% max |
Storage Temperature Range: -10 to +60ç(Note 2)Storage Humidity Range: 40 to 70% (Note2) |
| tem |
Specification |
Condition |
| 1.Insulation Resistance |
106M ohms |
100V DC |
| 2.WithstandingVoltage |
No flashover or insulationbreakdown. |
1000V AC (insulation displacement, crimpingtype: 650V AC) /1 minute. |
| 3.Contact Resistance |
20m ohms max. |
0.1A |
| 4.Vibration |
No electrical discontinuity of10µs or more |
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. |
| 5.Humidity(Steadystate) |
Insulation resistance : 106M ohms min. |
96 hours at temperature of 40ç and humidity of 90% to 95% |
| 6.Temperature Cycle |
No damage, cracks, orpartslooseness. |
(-65ç : 30 minutes15 to 35ç: 5 minutes max.125ç : 30 minutes15 to 35ç: 5 minutes max.) 5cycles |
| 7.Durability(Mating/unmating) |
Contact resistance : 20m ohms max. |
500 cycles |
| 8.Resistance to Soldering heat |
No deformation of componentsaffecting performance. |
Manual soldering: 300ç for 3 seconds |
IEC603-2 Data Sheet
