IDT74CBTLV3861

Features:

· 5W A/B bidirectional switch
· Isolation Under Power-Off Conditions
· Over-voltage tolerant
· Latch-up performance exceeds 100mA
· VCC = 2.3V - 3.6V, Normal Range
· ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0)
· Available in SSOP, QSOP, and TSSOP packages


Application

· 3.3V High Speed Bus Switching and Bus Isolation


Pinout




Specifications

Symbol	Description	Max	Unit
VCC	Supply Voltage Range	0.5 to 4.6	V
VI	Input Voltage Range	0.5 to 4.6	V
	Continuous Channel Current	128	mA
IIK	Input Clamp Current, VI/O < 0	-50	mA
TSTG	Storage Temperature Range	65 to +150	°C

NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

Description

The CBTLV3861 provides ten bits of high-speed bus switching with low on-state resistance of the switch allowing connections to be made with minimal propagation delay.

The IDT74CBTLV3861 is organized as one 10-bit bus switch. When output enable (OE) is low, the 10-bit bus switch is on and port A is connected to port B. When OEis high, the switch is open and a high-impedance state exists between the two ports.

To ensure the high-impedance state during power up or power down, OE IDT74CBTLV3861 should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.